在CentOS 7 mini版中使用ifconfig

众所周知，“ifconfig”命令用于配置GNU/Linux系统的网络接口。它显示网络接口卡的详细信息，包括IP地址，MAC地址，以及网络接口卡状态之类。但是，该命令已经过时了，而且在最小化版本的RHEL 7以及它的克隆版本CentOS 7，Oracle Linux 7和Scientific Linux 7中也找不到该命令。那么问题来了，怎么在Centos7中查看ip信息呢？怎么操作才能找回以前的习惯呢？

CentOS 7最小化系统，使用“ip addr”和“ip link”命令来查找网卡详情。要知道统计数据，可以使用“ip -s link”。

[root@linuxprobe ~]#ip addr
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN 
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
    inet 127.0.0.1/8 scope host lo
    inet6 ::1/128 scope host 
       valid_lft forever preferred_lft forever
2: venet0: <BROADCAST,POINTOPOINT,NOARP,UP,LOWER_UP> mtu 1500 qdisc noqueue state UNKNOWN 
    link/void 
    inet 127.0.0.1/32 scope host venet0
    inet 192.168.1.101/32 brd 192.168.1.101 scope global venet0:0

[root@linuxprobe ~]#ip link
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN mode DEFAULT 
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
2: venet0: <BROADCAST,POINTOPOINT,NOARP,UP,LOWER_UP> mtu 1500 qdisc noqueue state UNKNOWN mode DEFAULT 
    link/void

或者使用：ip -s link

[root@linuxprobe ~]#ip -s link
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN mode DEFAULT 
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
    RX: bytes  packets  errors  dropped overrun mcast   
    0          0        0       0       0       0      
    TX: bytes  packets  errors  dropped carrier collsns 
    0          0        0       0       0       0      
2: venet0: <BROADCAST,POINTOPOINT,NOARP,UP,LOWER_UP> mtu 1500 qdisc noqueue state UNKNOWN mode DEFAULT 
    link/void 
    RX: bytes  packets  errors  dropped overrun mcast   
    8515667    6667     0       0       0       0      
    TX: bytes  packets  errors  dropped carrier collsns 
    300403     4249     0       0       0       0

如果你不知道在哪里可以找到ifconfig命令，请按照以下简单的步骤来找到它。

[root@linuxprobe ~]# yum provides ifconfig
Loaded plugins: fastestmirror
Loading mirror speeds from cached hostfile
 * base: centos.aol.in
 * extras: centos.aol.in
 * updates: centos.aol.in
net-tools-2.0-0.17.20131004git.el7.x86_64 : Basic networking tools
Repo        : @base
Matched from:
Filename    : /usr/sbin/ifconfig

或者你也可以使用以下命令

yum whatprovides ifconfig

这里，“provides”或者“whatprovides”开关用于找出某个包提供了某些功能或文件。

net-tools包提供了ifconfig命令。因此，安装net-tools包也可以使用ifconfig命令。

yum install net-tools

现在，你就可以像以往一样使用ifconfig命令了。

[root@linuxprobe ~]# ifconfig -a
lo: flags=73<UP,LOOPBACK,RUNNING>  mtu 16436
        inet 127.0.0.1  netmask 255.0.0.0
        inet6 ::1  prefixlen 128  scopeid 0x10<host>
        loop  txqueuelen 0  (Local Loopback)
        RX packets 0  bytes 0 (0.0 B)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 0  bytes 0 (0.0 B)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

venet0: flags=211<UP,BROADCAST,POINTOPOINT,RUNNING,NOARP>  mtu 1500
        inet 127.0.0.1  netmask 255.255.255.255  broadcast 0.0.0.0  destination 127.0.0.1
        unspec 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00  txqueuelen 0  (UNSPEC)
        RX packets 7073  bytes 8549159 (8.1 MiB)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 4611  bytes 359201 (350.7 KiB)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

venet0:0: flags=211<UP,BROADCAST,POINTOPOINT,RUNNING,NOARP>  mtu 1500
        inet 192.168.1.101  netmask 255.255.255.255  broadcast 192.168.1.101  destination 192.168.1.101
        unspec 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00  txqueuelen 0  (UNSPEC)

尽情享受吧！

作者：Senthilkumar 译者：GOLinux 校对：Caroline

本文由 LCTT 原创翻译，Linux中国 荣誉推出

原文地址：http://www.linuxprobe.com/centos-7-use-ifconfig.html编辑员：陶武杰，审核员：冯振华