【求助】suse linux 9.3版登陆及关机问题
【求助】suse linux 9.3版登陆及关机问题--------------------------------------------------------------------------------
机器配置:P3:800,512M内存.30G富士通硬盘
系统:suse linux 9.3版 Xwindows为KDE
症状:系统在出问题之前是自动登陆,并且进入图形界面,关机正常.有重起,关机,锁屏选项.
经过一些误操作,系统不能自动登陆,要手动输入用户名和密码，登陆后进入控制台，输入STATRX可以进入图形界面，在图形界面上关机，只有离开登陆和取消两个选项。
请问该问题如何解决，望大哥们给予帮助。
谢谢！
敬礼！ [size=5]打开/etc下的inittab文件，头部内容如下，其它不用改[/size]
# Please send feedback to [url="http://www.suse.de/feedback"]http://www.suse.de/feedback[/url]
#
# This is the main configuration file of /sbin/init, which
# is executed by the kernel on startup. It describes what
# scripts are used for the different run-levels.
#
# All scripts for runlevel changes are in /etc/init.d/.
#
# This file may be modified by SuSEconfig unless CHECK_INITTAB
# in /etc/sysconfig/suseconfig is set to "no"
#
# The default runlevel is defined here
id:5:initdefault: :D:D:D[size=5][color=Red]应该是这行吧，5就表示默认进入KDE，你的可能是3吧？想自动进入KDE，就把这行数字改成5，我用的是SUSE10.0[/color][/size]
# First script to be executed, if not booting in emergency (-b) mode
si::bootwait:/etc/init.d/boot
# /etc/init.d/rc takes care of runlevel handling
#
# runlevel 0 is System halt (Do not use this for initdefault!)
# runlevel 1 is Single user mode
# runlevel 2 is Local multiuser without remote network (e.g. NFS)
# runlevel 3 is Full multiuser with network
# runlevel 4 is Not used
# runlevel 5 is Full multiuser with network and xdm
# runlevel 6 is System reboot (Do not use this for initdefault!)
页:
[1]