［求助] ATI显卡官方驱动安装问题
本人系统：Mandriva 2007 Spring我在ATI官方网站下载的50几兆的ati-driver-installer-8.36.5-x86.x86_64.run
用root身份运行 X_VERSION=x710 ./ati*36.5*.run
安装过程中显示找不到 install/usr/X11R6/lib/modules/dri/atiogl_a_dri.so 这个文件
[root@localhost ati]# X_VERSION=x710 ./ati*36.5*.run
Created directory fglrx-install.Y23748
Verifying archive integrity... All good.
Uncompressing ATI Proprietary Linux Driver-8.36.5...............................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................
==================================================
ATI Technologies Linux Driver Installer/Packager
==================================================
Detected configuration:
Architecture: i686 (32-bit)
X Server (OVERRIDEN BY USER): X.Org 7.1.x
loki_setup: 2 Unable to find file 'install/usr/X11R6/lib/modules/dri/atiogl_a_dri.so' in '/home/zearon/Download/ati/fglrx-install.Y23748'
Removing temporary directory: fglrx-install.Y23748
安装结束后，/usr/share/ati/fglrx-install.log 日志文件最后有一个错误：
[Message] Kernel Module : Trying to install a precompiled kernel module.
[Message] Kernel Module : Precompiled kernel module version mismatched.
[Message] Kernel Module : Found kernel module build environment, generating kernel module now.
ATI module generator V 2.0
==========================
initializing...
cleaning...
patching 'highmem.h'...
assuming new VMA API since we do have kernel 2.6.x...
Assuming default VMAP API
Assuming default munmap API
doing Makefile based build for kernel 2.6.x and higher
make -C /lib/modules/2.6.17-13mdv/build SUBDIRS=/lib/modules/fglrx/build_mod/2.6.x modules
make[1]: Entering directory `/usr/src/linux-2.6.17-13mdv'
WARNING: Symbol version dump /usr/src/linux-2.6.17-13mdv/Module.symvers
is missing; modules will have no dependencies and modversions.
CC [M] /lib/modules/fglrx/build_mod/2.6.x/firegl_public.o
In file included from /lib/modules/fglrx/build_mod/2.6.x/drm_proc.h:41,
from /lib/modules/fglrx/build_mod/2.6.x/firegl_public.c:333:
/lib/modules/fglrx/build_mod/2.6.x/drmP.h:126:1: warning: "DRM_DEBUG_CODE" redefined
/lib/modules/fglrx/build_mod/2.6.x/firegl_public.c:177:1: warning: this is the location of the previous definition
/lib/modules/fglrx/build_mod/2.6.x/firegl_public.c:451: warning: initialization from incompatible pointer type
/lib/modules/fglrx/build_mod/2.6.x/firegl_public.c: In function 'firegl_stub_open':
/lib/modules/fglrx/build_mod/2.6.x/firegl_public.c:574: warning: assignment discards qualifiers from pointer target type
/lib/modules/fglrx/build_mod/2.6.x/firegl_public.c: In function 'KAS_ExecuteAtLevel':
/lib/modules/fglrx/build_mod/2.6.x/firegl_public.c:4706: warning: 'flags' may be used uninitialized in this function
LD [M] /lib/modules/fglrx/build_mod/2.6.x/fglrx.o
Building modules, stage 2.
MODPOST
CC /lib/modules/fglrx/build_mod/2.6.x/fglrx.mod.o
LD [M] /lib/modules/fglrx/build_mod/2.6.x/fglrx.ko
make[1]: Leaving directory `/usr/src/linux-2.6.17-13mdv'
build succeeded with return value 0
duplicating results into driver repository...
done.
==============================
- recreating module dependency list
- trying a sample load of the kernel modules
failed.
[Error] Kernel Module : Failed to install compiled kernel module - please consult readme.
不知道是怎么回事，哪位能告知是怎么回事阿？ 看来是模块没有创建成功，能把它的readme文件贴出来么？ 方法如下：
（2）显卡：自己安装驱动的确麻烦：kernel-source、kernel-header、make、gcc套件等都要，我们推荐采用urpmi来安装显卡的驱动
1、首先要添加plf软件源，因为一些软件只有plf里才有。
2、接着安装你现在使用的内核的版本对应的源码kernel-source，注意必须对应现用内核。
3、如果你是ATI显卡，安装如下软件包，没有就自己去搜索。
ati-8.28.8-3plf2007.0.i586.rpm
ati-kernel-2.6.17-9mdv-8.28.8-1mdk.i586.rpm
你安装了内核源代码吗？不熟悉添加plf软件源，用urpmi安装软件，参考：
[url]http://www.linuxeden.com/forum/t154900.html[/url]
页:
[1]