LINUX建立FTP服务器会的进
我才学LINUX 研究了几天建立FTP服务器都不行 有没有谁会的老大指点一下啊。。。。还有我用的是红旗LINUX5.0的 很难吗 尽然没一个人知道 你怎么配置的？用的是vsftpd ,wu-ftp还是其它的？把你的配置脚本发上来看看! 有没有外网IP，我可以远程来帮你看看。。 我用VSFTPD-2.0.5做的 要不提示 500 OOPS: vsftpd: not configured for standalone, must be started from inetd
要不就是：500 OOPS: could not bind listening IPv4 socket
我快疯了 # Example config file /etc/vsftpd.conf
#
# The default compiled in settings are fairly paranoid. This sample file
# loosens things up a bit, to make the ftp daemon more usable.
# Please see vsftpd.conf.5 for all compiled in defaults.
#
# READ THIS: This example file is NOT an exhaustive list of vsftpd options.
# Please read the vsftpd.conf.5 manual page to get a full idea of vsftpd's
# capabilities.
#
# Allow anonymous FTP? (Beware - allowed by default if you comment this out).
anonymous_enable=YES
#
# Uncomment this to allow local users to log in.
#local_enable=YES
#
# Uncomment this to enable any form of FTP write command.
#write_enable=YES
#
# Default umask for local users is 077. You may wish to change this to 022,
# if your users expect that (022 is used by most other ftpd's)
#local_umask=022
#
# Uncomment this to allow the anonymous FTP user to upload files. This only
# has an effect if the above global write enable is activated. Also, you will
# obviously need to create a directory writable by the FTP user.
#anon_upload_enable=YES
#
# Uncomment this if you want the anonymous FTP user to be able to create
# new directories.
#anon_mkdir_write_enable=YES
#
# Activate directory messages - messages given to remote users when they
# go into a certain directory.
dirmessage_enable=YES
#
# Activate logging of uploads/downloads.
xferlog_enable=YES
#
# Make sure PORT transfer connections originate from port 20 (ftp-data).
connect_from_port_20=YES
#
# If you want, you can arrange for uploaded anonymous files to be owned by
# a different user. Note! Using "root" for uploaded files is not
# recommended!
#chown_uploads=YES
#chown_username=whoever
#
# You may override where the log file goes if you like. The default is shown
# below.
#xferlog_file=/var/log/vsftpd.log
#
# If you want, you can have your log file in standard ftpd xferlog format
#xferlog_std_format=YES
#
# You may change the default value for timing out an idle session.
#idle_session_timeout=600
#
# You may change the default value for timing out a data connection.
#data_connection_timeout=120
#
# It is recommended that you define on your system a unique user which the
# ftp server can use as a totally isolated and unprivileged user.
#nopriv_user=ftpsecure
#
# Enable this and the server will recognise asynchronous ABOR requests. Not
# recommended for security (the code is non-trivial). Not enabling it,
# however, may confuse older FTP clients.
#async_abor_enable=YES
#
# By default the server will pretend to allow ASCII mode but in fact ignore
# the request. Turn on the below options to have the server actually do ASCII
# mangling on files when in ASCII mode.
# Beware that on some FTP servers, ASCII support allows a denial of service
# attack (DoS) via the command "SIZE /big/file" in ASCII mode. vsftpd
# predicted this attack and has always been safe, reporting the size of the
# raw file.
# ASCII mangling is a horrible feature of the protocol.
#ascii_upload_enable=YES
#ascii_download_enable=YES
#
# You may fully customise the login banner string:
#ftpd_banner=Welcome to blah FTP service.
#
# You may specify a file of disallowed anonymous e-mail addresses. Apparently
# useful for combatting certain DoS attacks.
#deny_email_enable=YES
# (default follows)
#banned_email_file=/etc/vsftpd.banned_emails
#
# You may specify an explicit list of local users to chroot() to their home
# directory. If chroot_local_user is YES, then this list becomes a list of
# users to NOT chroot().
#chroot_list_enable=YES
# (default follows)
#chroot_list_file=/etc/vsftpd.chroot_list
#
# You may activate the "-R" option to the builtin ls. This is disabled by
# default to avoid remote users being able to cause excessive I/O on large
# sites. However, some broken FTP clients such as "ncftp" and "mirror" assume
# the presence of the "-R" option, so there is a strong case for enabling it.
#ls_recurse_enable=YES
#listen=YES 设置vsftpd就行，不会的话找本书看，费不了多少时间。 我也不知道那里错了 网上的教程我都是那样做的啊。。。 那么大论坛就没会的 真失望 闪了;P 默认开启服务就可以访问了
chkconfig vsftpd on
service vsftpd start
就可以访问公用公用文件夹 pub vsftpd.conf中缺个配置
pam_service_name=vsftpd 我自己研究了N天搞好可以了 我只有个公共用户 我还想建立多个本地用户 可不可以每个用户都设定不同的权限 用密码登录的形式 不是一访问就要密码那种 就差一点了 帮帮我阿 小弟感激不尽 我用的是 sftpd-2.0.5的 在下线等阿 版主老大帮个 忙阿 我只有个公共用户 我还想建立多个本地用户 可不可以每个用户都设定不同的权限 用密码登录的形式 不是一访问就要密码那种
你的方案是什么
启用匿名访问吗？ FTP公共用户也就说 可以访问。下载，执行。不能上传和删除 我还想设置个人用户 权限：访问。下载，执行。上传 但不要删除 就想SERV－那样的功能 VSFTPD做的到吗？ 进入到FTP然后选择登录输入密码进入个人用户 :L 我无语``自己上网找资料`` 找到了 我就不在这里问 能像SERV-U一些的功能就好了 我不想用WINDOWS做服务器了 老中毒 我说的那个方案不行吗？我有想了一个
就要一个匿名用户权限：读取 下载 不要上传
建立虚拟用户 用设置虚拟IP访问 行不吗
研究到我都要哭了
页:
[1]
2