无法使用cdrom
我用VPC虚拟的PC装上了GENTOO，但是按教程做完了前部分重起后，显示里找到了虚拟出来的光驱，但是放了碟子进去后没办法MOUNT:confused:以下是我的/etc/fstab文件内容：
GNU nano 1.2.1 File: /etc/fstab Modified
# /etc/fstab: static file system information.
# $Header: /home/cvsroot/gentoo-src/rc-scripts/etc/fstab,v 1.12 2003/03/11 02:5
#
# noatime turns of atimes for increased performance (atimes normally aren't
# needed; notail increases performance of ReiserFS (at the expense of storage
# efficiency). It's safe to drop the noatime options if you want and to
# switch between notail and tail freely.
# <fs> <mountpoint> <type> <opts>
# NOTE: If your BOOT partition is ReiserFS, add the notail option to opts.
/dev/hda1 /boot ext2 noauto,noatime 1 1
/dev/hda3 / ext3 noatime 0 0
/dev/hda2 none swap sw 0 0
/dev/cdroms/cdrom0 /mnt/cdrom iso9660 noauto,ro 0 0
# NOTE: The next line is critical for boot!
none /proc proc defaults
/dev/cdroms/cdrom0 /mnt/cdrom iso9660 noauto,owner,user,ro,iocharset=cp936 0 0
# glibc 2.2 and above expects tmpfs to be mounted at /dev/shm for
# POSIX shared memory (shm_open, shm_unlink).
# (tmpfs is a dynamically expandable/shrinkable ramdisk, and will
# use almost no memory if not populated with files)
# Adding the following line to /etc/fstab should take care of this:
none /dev/shm tmpfs defaults
/dev/cdroms/cdrom0 /mnt/cdrom iso9660 noauto,owner,user,ro,iocharset=cp936 0 0
/dev/cdroms/cdrom1 /mnt/cdrom iso9660 noauto,owner,user,ro,iocharset=cp936 0 0
/dev/fd0 /mnt/floppy auto noauto,owner,user 0 0
请高手帮忙 mount -t iso9660 /dev/hdc /mnt/cdrom none /dev/shm tmpfs defaults
/dev/cdroms/cdrom0 /mnt/cdrom iso9660 noauto,owner,user,ro,iocharset=cp936 0 0
/dev/cdroms/cdrom1 /mnt/cdrom iso9660 noauto,owner,user,ro,iocharset=cp936 0 0
有两个CDROM？:confused: 看看虚拟出来的光驱的路径在哪里？我在vmware中光驱的路径设置起来很随意，
要不注释掉一个
/dev/cdroms/cdrom1 /mnt/cdrom iso9660 noauto,owner,user,ro,iocharset=cp936 0 0
页:
[1]