我在我的486上使用了LRP（linux routing project)，是用软盘启动的，可是我的软驱最近有些问题，我有一个硬盘80M，请问我是否可以把LRP系统拷贝到硬盘上，从硬盘启动，如果可以，我要怎么办（怎么设置）？？　　　　　　

你用的是不是BBIagent？
我也想将它改成硬盘的。　　　　　　

lrp use syslinux to boot the system.you have better to downlord the soft suit syslinux.it can make you boot form cd ,floppy ,hd .you should try it,i have no time to do it for you.i had read it's readme.if you have any difficult,tell me.good luck!　　　　　　

thank you very much!
I'll try it,
I think its very difficult to change the kernel of LRP.I have tried it for three times!!!　　　　　　

the kernel can be placed easily.but you must keep in mind the driver's modules must keep the same verson with kernel.otherwise,they will not work.i have some guestion to ask.whether lrp support D-router protocol,it only support RIP router protocol.it is known RIP is a static router protocol.how it can support OSFP and other D-router protocol.another question is how to use ppp under lrp to connect some pc with null moden.(直连电缆）　　　　　　

能否把BBIagent or LRP 写入网卡的ROM中，从网卡启动？