我用的是suse10，安装时的内核是2.6.13-15,我编译2.6.16时的步骤如下，请大家帮我一下:
    1、下载
    2、解压缩到/下
    3、进去目录，
    4、make mrproper
   
    5、make menuconfig，
    在编译.config前出现的提示是：
   
   
    6、make 这时也出现了一些警告
    7、make modules_install
   
    8、make install 这时出现的提示是：
   
    linux:/linux-2.6.16 # make install
    sh /linux-2.6.16/arch/i386/boot/install.sh 2.6.16 arch/i386/boot/bzImage System.map "/boot"
    Root device:    /dev/hda12 (mounted on / as ext3)
    Module list:    via82cxxx processor thermal fan jbd ext3
   
    Kernel image:   /boot/vmlinuz-2.6.16
    Initrd image:   /boot/initrd-2.6.16
Shared libs: lib/ld-2.3.5.so lib/libblkid.so.1.0 lib/libc-2.3.5.so lib/libcom_err.so.2.1 lib/libext2fs.so.2.4 lib/libselinux.so.1 lib/libuuid.so.1.2
    Cannot determine dependencies of module via82cxxx. Is modules.dep up to date?
    Cannot determine dependencies of module processor. Is modules.dep up to date?
    Cannot determine dependencies of module thermal. Is modules.dep up to date?
    Cannot determine dependencies of module fan. Is modules.dep up to date?
    Driver modules: via82cxxx processor thermal fan
    Filesystem modules:     jbd ext3
    Including:      klibc initramfs udev fsck.ext3
    Bootsplash:     SuSE (1024x768), SuSE (800x600)
    13834 blocks
    Using grub, re-install of bootloader not required.
   
    这时我的／boot／grub下的文件menu.lst文件里加了这几行
    title Linux-2.6.16
        root (hd0,11)
        kernel /boot/vmlinuz-2.6.16 root=/dev/hda12 vga=788 selinux=0  resume=/dev/hda13  splash=silent showopts
        initrd /boot/initrd-2.6.16
    在对应的文件夹里也能找到这些文件，重新启动时，也能选择新内核，并能进入系统，只是有许多“不正常”的东西，我的boot.msg文件内容如下：
   
  <notice><notice><notice><notice><notice><notice><notice><notice><notice><notice><notice><notice><notice><notice><notice><notice><notice><notice><notice>

.</notice></notice></notice></notice></notice></notice></notice></notice></notice></notice></notice></notice></notice></notice></notice></notice></notice></notice></notice>　　　　　　

我的boot.msg文件内容如下：
  
  Inspecting /boot/System.map-2.6.16
  Loaded 25312 symbols from /boot/System.map-2.6.16.
  Symbols match kernel version 2.6.16.
  No module symbols loaded - kernel modules not enabled.
  
  klogd 1.4.1, log source = ksyslog started.
<5>Linux version 2.6.16 (root@linux) (gcc version 4.0.2 20050901 (prerelease) (SUSE Linux)) #1 Sun Apr 9 14:13:17 CST 2006
  <6>BIOS-provided physical RAM map:
  <4> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
  <4> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
  <4> BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
  <4> BIOS-e820: 0000000000100000 - 000000000fef0000 (usable)
  <4> BIOS-e820: 000000000fef0000 - 000000000fef3000 (ACPI NVS)
  <4> BIOS-e820: 000000000fef3000 - 000000000ff00000 (ACPI data)
  <4> BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
  <5>254MB LOWMEM available.
  <7>On node 0 totalpages: 65264
  <7> DMA zone: 4096 pages, LIFO batch:0
  <7> DMA32 zone: 0 pages, LIFO batch:0
  <7> Normal zone: 61168 pages, LIFO batch:15
  <7> HighMem zone: 0 pages, LIFO batch:0
  <6>DMI 2.2 present.
  <7>ACPI: RSDP (v000 KT600 ) @ 0x000f6bb0
  <7>ACPI: RSDT (v001 KT600 AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x0fef3000
  <7>ACPI: FADT (v001 KT600 AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x0fef3040
  <7>ACPI: DSDT (v001 KT600 AWRDACPI 0x00001000 MSFT 0x0100000e) @ 0x00000000
  <6>ACPI: PM-Timer IO Port: 0x4008
  <4>Allocating PCI resources starting at 10000000 (gap: 0ff00000:f00f0000)
  <4>Built 1 zonelists
  <5>Kernel command line: root=/dev/hda12 vga=788 selinux=0 resume=/dev/hda13 splash=silent
  <6>Enabling fast FPU save and restore... done.
  <6>Enabling unmasked SIMD FPU exception support... done.
  <6>Initializing CPU#0
  <4>CPU 0 irqstacks, hard=c03df000 soft=c03e0000
  <4>ID hash table entries: 1024 (order: 10, 16384 bytes)
  <4>Detected 2083.588 MHz processor.
  <6>Using pmtmr for high-res timesource
  <4>Console: colour dummy device 80x25
  <4>Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
  <4>Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
  <6>Memory: 252072k/261056k available (1863k kernel code, 8396k reserved, 901k data, 148k init, 0k highmem)
  <4>Checking if this processor honours the WP bit even in supervisor mode... Ok.
  <4>Calibrating delay using timer specific routine.. 4172.94 BogoMIPS (lpj=8345895)
  <6>Security Framework v1.0.0 initialized
  <6>SELinux: Disabled at boot.
  <6>Capability LSM initialized
  <4>Mount-cache hash table entries: 512
  <7>CPU: After generic identify, caps: 0383f9ff c1c3f9ff 00000000 00000000 00000000 00000000 00000000
  <7>CPU: After vendor identify, caps: 0383f9ff c1c3f9ff 00000000 00000000 00000000 00000000 00000000
  <6>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
  <6>CPU: L2 Cache: 256K (64 bytes/line)
  <7>CPU: After all inits, caps: 0383f9ff c1c3f9ff 00000000 00000020 00000000 00000000 00000000
  <4>CPU: AMD Athlon(tm) XP 2600+ stepping 01
  <6>Checking 'hlt' instruction... OK.
  <4>ACPI: setting ELCR to 0200 (from 0aa0)
  <6>checking if image is initramfs... it is
  <6>Freeing initrd memory: 2842k freed
  <6>NET: Registered protocol family 16
  <6>ACPI: bus type pci registered
  <6>CI: PCI BIOS revision 2.10 entry at 0xfb2c0, last bus=1
  <6>CI: Using configuration type 1
  <6>ACPI: Subsystem revision 20060127
  <6>ACPI: Interpreter enabled
  <6>ACPI: Using PIC for interrupt routing
  <6>ACPI: PCI Root Bridge [PCI0] (0000:00)
  <7>CI: Probing PCI hardware (bus 00)
  <6>ACPI: Assume root bridge [\_SB_.PCI0] bus is 0
  <7>Boot video device is 0000:01:00.0
  <7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
  <4>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 10 *11 12)
  <4>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 6 *7 10 11 12)
  <4>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 10 11 12) *5
  <4>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 10 11 12) *0, disabled.
  <4>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12) *0, disabled.
  <4>ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 7 10 11 12) *0, disabled.
  <4>ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 6 7 10 11 12) *0, disabled.
  <4>ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 6 7 10 11 12) *0, disabled.
  <6>Linux Plug and Play Support v0.97 (c) Adam Belay
  <6>pnp: PnP ACPI init
  <6>pnp: PnP ACPI: found 12 devices
  <6>PCI: Using ACPI for IRQ routing
  <6>PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
  <6>pnp: 00:02: ioport range 0x4000-0x407f could not be reserved
  <6>pnp: 00:02: ioport range 0x5000-0x500f has been reserved
  <6>PCI: Bridge: 0000:00:01.0
  <6> IO window: disabled.
  <6> MEM window: ec000000-edffffff
  <6> PREFETCH window: e0000000-e7ffffff
  <7>PCI: Setting latency timer of device 0000:00:01.0 to 64
  <6>apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
  <5>apm: overridden by ACPI.
  <6>audit: initializing netlink socket (disabled)
  <5>audit(1144628807.620:1): initialized
  <4>Total HugeTLB memory allocated, 0
  <5>VFS: Disk quotas dquot_6.5.1
  <4>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
  <6>Initializing Cryptographic API
  <6>io scheduler noop registered
  <6>io scheduler anticipatory registered (default)
  <6>io scheduler deadline registered
  <6>io scheduler cfq registered
  <6>vesafb: framebuffer at 0xe0000000, mapped to 0xd0880000, using 1875k, total 65536k
  <6>vesafb: mode is 800x600x16, linelength=1600, pages=2
  <6>vesafb: protected mode interface info at c000:f060
  <6>vesafb: scrolling: redraw
  <6>vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
  <4>Console: switching to colour frame buffer device 100x37
  <6>fb0: VESA VGA frame buffer device
  <6>ACPI: Fan [FAN] (on)
  <6>ACPI: CPU0 (power states: C1[C1] C2[C2])
  <6>ACPI: Thermal Zone [THRM] (32 C)
  <6>Real Time Clock Driver v1.12ac
  <6>Linux agpgart interface v0.101 (c) Dave Jones
  <6>agpgart: Detected VIA KT400/KT400A/KT600 chipset
  <6>agpgart: AGP aperture is 64M @ 0xe8000000
  <6>PNP: PS/2 Controller [PNP0303S2K,PNP0f13S2M] at 0x60,0x64 irq 1,12
  <6>serio: i8042 AUX port at 0x60,0x64 irq 12
  <6>serio: i8042 KBD port at 0x60,0x64 irq 1
  <6>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
  <6>Floppy drive(s): fd0 is 1.44M
  <6>FDC 0 is a post-1991 82077
  <4>RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize
  <6>8139too Fast Ethernet driver 0.9.27
  <4>ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
  <7>PCI: setting IRQ 11 as level-triggered
  <6>ACPI: PCI Interrupt 0000:00:0c.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
  <6>eth0: RealTek RTL8139 at 0xd000, 00:e0:4d:a0:33:39, IRQ 11
  <7>eth0: Identified 8139 chip type 'RTL-8100B/8139D'
  <6>Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
  <6>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
  <6>VP_IDE: IDE controller at PCI slot 0000:00:0f.0
  <6>ACPI: PCI Interrupt 0000:00:0f.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
  <6>PCI: Via IRQ fixup for 0000:00:0f.0, from 255 to 11
  <6>VP_IDE: chipset revision 6
  <6>VP_IDE: not 100% native mode: will probe irqs later
  <6>VP_IDE: VIA vt8237 (rev 00) IDE UDMA133 controller on pci0000:00:0f.0
  <6> ide0: BM-DMA at 0xd400-0xd407, BIOS settings: hdaMA, hdbio
  <6> ide1: BM-DMA at 0xd408-0xd40f, BIOS settings: hdcMA, hddio
  <7>Probing IDE interface ide0...
  <4>hda: Maxtor 6B080P0, ATA DISK drive
  <4>ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
  <7>Probing IDE interface ide1...
  <4>hdc: ATAPI CDROM, ATAPI CD/DVD-ROM drive
  <4>ide1 at 0x170-0x177,0x376 on irq 15
  <6>hda: max request size: 128KiB
  <6>hda: 160086528 sectors (81964 MB) w/8192KiB Cache, CHS=65535/16/63, UDMA(133)
  <6>hda: cache flushes supported
  <6> hda: hda1 hda2 hda3 < hda5 hda6 hda7 hda8 hda9 hda10 hda11 hda12 hda13 >
  <6>hdc: ATAPI 48X CD-ROM drive, 128kB Cache, DMA
  <6>Uniform CD-ROM driver Revision: 3.20
  <4>ide-floppy driver 0.99.newide
  <6>mice: PS/2 mouse device common for all mice
  <6>Advanced Linux Sound Architecture Driver Version 1.0.11rc2 (Wed Jan 04 08:57:20 2006 UTC).
  <6>via82xx: Assuming DXS channels with 48k fixed sample rate.
  <6> Please try dxs_support=5 option
  <6> and report if it works on your machine.
  <6> For more details, read ALSA-Configuration.txt.
  <4>ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
  <6>ACPI: PCI Interrupt 0000:00:11.5[C] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11
  <6>PCI: Via IRQ fixup for 0000:00:11.5, from 5 to 11
  <7>PCI: Setting latency timer of device 0000:00:11.5 to 64
  <6>input: AT Translated Set 2 keyboard as /class/input/input0
  <6>ALSA device list:
  <6> #0: VIA 8237 with ALC655 at 0xe800, irq 11
  <6>NET: Registered protocol family 2
  <4>IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
  <4>TCP established hash table entries: 8192 (order: 5, 131072 bytes)
  <4>TCP bind hash table entries: 8192 (order: 5, 163840 bytes)
  <6>TCP: Hash tables configured (established 8192 bind 8192)
  <6>TCP reno registered
  <6>TCP bic registered
  <6>Initializing IPsec netlink socket
  <6>NET: Registered protocol family 1
  <6>NET: Registered protocol family 17
  <4>Using IPI Shortcut mode
  <4>ACPI wakeup devices:
  <4>SLPB PCI0 USB0 USB1 USB2 USB6 USB7 USB8 USB9 MC97
  <6>ACPI: (supports S0 S1 S4 S5)
  <6>Freeing unused kernel memory: 148k freed
  <6>input: ImPS/2 Generic Wheel Mouse as /class/input/input1
  <6>kjournald starting. Commit interval 5 seconds
  <6>EXT3 FS on hda12, internal journal
  <6>EXT3-fs: mounted filesystem with ordered data mode.
  <6>kjournald starting. Commit interval 5 seconds
  <6>EXT3 FS on hda11, internal journal
  <6>EXT3-fs: mounted filesystem with ordered data mode.
  <6>kjournald starting. Commit interval 5 seconds
  <6>EXT3 FS on hda9, internal journal
  <6>EXT3-fs: mounted filesystem with ordered data mode.
  <6>kjournald starting. Commit interval 5 seconds
  <6>EXT3 FS on hda10, internal journal
  <6>EXT3-fs: mounted filesystem with ordered data mode.
  <6>NTFS driver 2.1.26 [Flags: R/W DEBUG MODULE].
  <6>NTFS volume version 3.1.
  <6>NTFS volume version 3.1.
  <6>NTFS volume version 3.1.
  Kernel logging (ksyslog) stopped.
  Kernel log daemon terminating.
  

<notice><notice><notice><notice><notice><notice><notice><notice><notice><notice><notice><notice><notice><notice><notice><notice><notice><notice><notice></notice></notice></notice></notice></notice></notice></notice></notice></notice></notice></notice></notice></notice></notice></notice></notice></notice></notice></notice>　　　　　　

我的boot.msg文件内容如下：（接上）

  Boot logging started on /dev/tty1(/dev/console) at Mon Apr 10 00:26:55 2006

Master Resource Control: previous runlevel: N, switching to runlevel: 5
checkproc: /sbin/udevd 1437checkproc: /sbin/udevd 1435checkproc: /sbin/udevd 1434checkproc: /sbin/udevd 1364
startproc: execve (/usr/bin/dbus-daemon) [ /usr/bin/dbus-daemon --system ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.85 REDIRECT=/dev/tty1 COLUMNS=100 PATH=/sbin:/usr/sbin:/bin:/usr/bin:/lib/klibc/bin vga=788 RUNLEVEL=5 resume=/dev/hda13 PWD=/ SPLASHCFG= PREVLEVEL=N LINES=37 HOME=/ SHLVL=2 splash=silent SPLASH=no ROOTFS_BLKDEV=/dev/hda12 _=/sbin/startproc DAEMON=/usr/bin/dbus-daemon ]
startproc: execve (/sbin/syslog-ng) [ /sbin/syslog-ng ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.85 REDIRECT=/dev/tty1 COLUMNS=100 PATH=/sbin:/usr/sbin:/bin:/usr/bin:/lib/klibc/bin vga=788 RUNLEVEL=5 SPLASHCFG= PWD=/ resume=/dev/hda13 PREVLEVEL=N LINES=37 SHLVL=2 HOME=/ SPLASH=no splash=silent ROOTFS_BLKDEV=/dev/hda12 _=/sbin/startproc DAEMON=/sbin/syslog-ng ]
Starting D-BUS daemondone
Starting syslog servicesstartproc: execve (/sbin/klogd) [ /sbin/klogd -c 1 -x -x ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.85 REDIRECT=/dev/tty1 COLUMNS=100 PATH=/sbin:/usr/sbin:/bin:/usr/bin:/lib/klibc/bin vga=788 RUNLEVEL=5 SPLASHCFG= PWD=/ resume=/dev/hda13 PREVLEVEL=N LINES=37 SHLVL=2 HOME=/ SPLASH=no splash=silent ROOTFS_BLKDEV=/dev/hda12 _=/sbin/startproc DAEMON=/sbin/klogd ]
done
Initializing random number generatordone
startproc: execve (/sbin/resmgrd) [ /sbin/resmgrd ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.85 REDIRECT=/dev/tty1 COLUMNS=100 PATH=/sbin:/usr/sbin:/bin:/usr/bin:/lib/klibc/bin vga=788 RUNLEVEL=5 resume=/dev/hda13 PWD=/ SPLASHCFG= PREVLEVEL=N LINES=37 HOME=/ SHLVL=2 splash=silent SPLASH=no ROOTFS_BLKDEV=/dev/hda12 _=/sbin/startproc DAEMON=/sbin/resmgrd ]
Starting resource managerdone
Loading keymap qwerty/us.map.gz
doneLoading compose table winkeys shiftctrl latin1.adddone
Start Unicode mode
doneLoading console font lat1-16.psfu -m none G0:iso8859-1
doneSetting up network interfaces:
lo
lo IP address: 127.0.0.1/8
doneWaiting for mandatory devices: eth-id-00:e0:4d:a0:33:39
19 18 17 15 14 pidofproc: dhcpcd 2685
12
eth0 device: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)
eth0 configuration: eth-id-00:e0:4d:a0:33:39
eth0 DHCP client (dhcpcd) is running
eth0 IP address: 192.168.0.4/24
doneSetting up service network . . . . . . . . . . . . . . . .done
startproc: execve (/usr/sbin/mdnsd) [ /usr/sbin/mdnsd -f /etc/nss_mdns.conf -b ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.85 REDIRECT=/dev/tty1 COLUMNS=100 PATH=/sbin:/usr/sbin:/bin:/usr/bin:/lib/klibc/bin vga=788 RUNLEVEL=5 resume=/dev/hda13 PWD=/ SPLASHCFG= PREVLEVEL=N LINES=37 HOME=/ SHLVL=2 splash=silent SPLASH=no ROOTFS_BLKDEV=/dev/hda12 _=/sbin/startproc DAEMON=/usr/sbin/mdnsd ]
startproc: execve (/sbin/portmap) [ /sbin/portmap ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.85 REDIRECT=/dev/tty1 COLUMNS=100 PATH=/sbin:/usr/sbin:/bin:/usr/bin:/lib/klibc/bin vga=788 RUNLEVEL=5 resume=/dev/hda13 PWD=/ SPLASHCFG= PREVLEVEL=N LINES=37 HOME=/ SHLVL=2 splash=silent SPLASH=no ROOTFS_BLKDEV=/dev/hda12 _=/sbin/startproc DAEMON=/sbin/portmap ]
Starting mdnsddone
Starting RPC portmap daemondone
Mount SMB/ CIFS File Systems unused
Importing Net File System (NFS)unused
Starting nfsboot (sm-notify) done
FATAL: Module snd_seq_oss not found.
FATAL: Module snd_seq_midi not found.
FATAL: Module snd_pcm_oss not found.
startproc: execve (/usr/sbin/acpid) [ /usr/sbin/acpid ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.85 REDIRECT=/dev/tty1 COLUMNS=100 PATH=/sbin:/usr/sbin:/bin:/usr/bin:/lib/klibc/bin vga=788 RUNLEVEL=5 resume=/dev/hda13 PWD=/ SPLASHCFG= PREVLEVEL=N LINES=37 HOME=/ SHLVL=2 splash=silent SPLASH=no ROOTFS_BLKDEV=/dev/hda12 _=/sbin/startproc DAEMON=/usr/sbin/acpid ]
acpid: loading ACPI modules ( button ) failed
Starting acpid done
startproc: execve (/usr/sbin/cupsd) [ /usr/sbin/cupsd ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.85 REDIRECT=/dev/tty1 COLUMNS=100 PATH=/sbin:/usr/sbin:/bin:/usr/bin:/lib/klibc/bin vga=788 RUNLEVEL=5 resume=/dev/hda13 PWD=/ SPLASHCFG= PREVLEVEL=N LINES=37 HOME=/ SHLVL=2 splash=silent SPLASH=no ROOTFS_BLKDEV=/dev/hda12 _=/usr/bin/ionice DAEMON=/usr/sbin/cupsd ]
Starting cupsddone
Starting Name Service Cache Daemonstartproc: execve (/usr/sbin/nscd) [ /usr/sbin/nscd ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.85 REDIRECT=/dev/tty1 COLUMNS=100 PATH=/sbin:/usr/sbin:/bin:/usr/bin:/lib/klibc/bin vga=788 RUNLEVEL=5 resume=/dev/hda13 PWD=/ SPLASHCFG= PREVLEVEL=N LINES=37 HOME=/ SHLVL=2 splash=silent SPLASH=no ROOTFS_BLKDEV=/dev/hda12 _=/sbin/startproc DAEMON=/usr/sbin/nscd ]
done
Checking/updating CPU microcodefailed
Starting service gdmstartproc: execve (/opt/gnome/sbin/gdm) [ /opt/gnome/sbin/gdm ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 INIT_VERSION=sysvinit-2.85 KDEROOTHOME=/root/.kdm REDIRECT=/dev/tty1 COLUMNS=100 PATH=/sbin:/usr/sbin:/bin:/usr/bin:/lib/klibc/bin vga=788 RUNLEVEL=5 resume=/dev/hda13 PWD=/ SPLASHCFG= LANG=zh_CN.UTF-8 PREVLEVEL=N LINES=37 HOME=/ SHLVL=2 XCURSOR_THEME=Industrial WINDOWMANAGER=/usr/X11R6/bin/gnome splash=silent SPLASH=no ROOTFS_BLKDEV=/dev/hda12 _=/sbin/startproc DAEMON=/opt/gnome/sbin/gdm ]
done
Starting mail service (Postfix)done
Starting CRON daemonstartproc: execve (/usr/sbin/cron) [ /usr/sbin/cron ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.85 REDIRECT=/dev/tty1 COLUMNS=100 PATH=/sbin:/usr/sbin:/bin:/usr/bin:/lib/klibc/bin vga=788 RUNLEVEL=5 resume=/dev/hda13 PWD=/ SPLASHCFG= PREVLEVEL=N LINES=37 HOME=/ SHLVL=2 splash=silent SPLASH=no ROOTFS_BLKDEV=/dev/hda12 _=/sbin/startproc DAEMON=/usr/sbin/cron ]
done
Starting HAL daemonstartproc: execve (/usr/sbin/hald) [ /usr/sbin/hald --daemon=yes --retain-privileges ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.85 REDIRECT=/dev/tty1 COLUMNS=100 PATH=/sbin:/usr/sbin:/bin:/usr/bin:/lib/klibc/bin vga=788 RUNLEVEL=5 resume=/dev/hda13 PWD=/ SPLASHCFG= PREVLEVEL=N LINES=37 HOME=/ SHLVL=2 splash=silent SPLASH=no ROOTFS_BLKDEV=/dev/hda12 _=/sbin/startproc DAEMON=/usr/sbin/hald ]
done
Starting powersaved (accessing ACPI events over acpid) startproc: execve (/usr/sbin/powersaved) [ /usr/sbin/powersaved -d -f /var/run/acpid.socket -v 3 ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.85 REDIRECT=/dev/tty1 COLUMNS=100 PATH=/sbin:/usr/sbin:/bin:/usr/bin:/lib/klibc/bin vga=788 RUNLEVEL=5 resume=/dev/hda13 PWD=/ SPLASHCFG= PREVLEVEL=N LINES=37 HOME=/ SHLVL=2 splash=silent SPLASH=no ROOTFS_BLKDEV=/dev/hda12 _=/sbin/startproc DAEMON=/usr/sbin/powersaved ]
done
done
Starting Firewall Initialization (phase 2 of 2) SuSEfirewall2: Warning: ip6tables does not support state matching. Extended IPv6 support disabled.
FATAL: Module ip_tables not found.
FATAL: Module ip6table_filter not found.
FATAL: Module ip6table_mangle not found.
FATAL: Module ip_tables not found.
iptables-batch v1.3.3: can't initialize iptables table `filter': iptables who? (do you need to insmod?)
Perhaps iptables or your kernel needs to be upgraded.
SuSEfirewall2: Error: iptables-batch failed, re-running using iptables
FATAL: Module ip_tables not found.
iptables v1.3.3: can't initialize iptables table `filter': iptables who? (do you need to insmod?)
Perhaps iptables or your kernel needs to be upgraded.
FATAL: Module ip_tables not found.
iptables v1.3.3: can't initialize iptables table `filter': iptables who? (do you need to insmod?)
Perhaps iptables or your kernel needs to be upgraded.
FATAL: Module ip_tables not found.
iptables v1.3.3: can't initialize iptables table `filter': iptables who? (do you need to insmod?)
Perhaps iptables or your kernel needs to be upgraded.
FATAL: Module ip_tables not found.
iptables v1.3.3: can't initialize iptables table `filter': iptables who? (do you need to insmod?)
Perhaps iptables or your kernel needs to be upgraded.
FATAL: Module ip_tables not found.
iptables v1.3.3: can't initialize iptables table `filter': iptables who? (do you need to insmod?)
Perhaps iptables or your kernel needs to be upgraded.
FATAL: Module ip_tables not found.
iptables v1.3.3: can't initialize iptables table `filter': iptables who? (do you need to insmod?)
Perhaps iptables or your kernel needs to be upgraded.
FATAL: Module ip_tables not found.
iptables v1.3.3: can't initialize iptables table `filter': iptables who? (do you need to insmod?)
Perhaps iptables or your kernel needs to be upgraded.
FATAL: Module ip_tables not found.
iptables v1.3.3: can't initialize iptables table `filter': iptables who? (do you need to insmod?)
Perhaps iptables or your kernel needs to be upgraded.
FATAL: Module ip_tables not found.
iptables v1.3.3: can't initialize iptables table `nat': iptables who? (do you need to insmod?)
Perhaps iptables or your kernel needs to be upgraded.
FATAL: Module ip_tables not found.
iptables v1.3.3: can't initialize iptables table `nat': iptables who? (do you need to insmod?)
Perhaps iptables or your kernel needs to be upgraded.
FATAL: Module ip_tables not found.
iptables v1.3.3: can't initialize iptables table `mangle': iptables who? (do you need to insmod?)
Perhaps iptables or your kernel needs to be upgraded.
FATAL: Module ip_tables not found.
iptables v1.3.3: can't initialize iptables table `mangle': iptables who? (do you need to insmod?)
Perhaps iptables or your kernel needs to be upgraded.
FATAL: Module ip_tables not found.
iptables v1.3.3: can't initialize iptables table `filter': iptables who? (do you need to insmod?)
Perhaps iptables or your kernel needs to be upgraded.
FATAL: Module ip_tables not found.
iptables v1.3.3: can't initialize iptables table `filter': iptables who? (do you need to insmod?)
Perhaps iptables or your kernel needs to be upgraded.
FATAL: Module ip_tables not found.
iptables v1.3.3: can't initialize iptables table `filter': iptables who? (do you need to insmod?)
Perhaps iptables or your kernel needs to be upgraded.
FATAL: Module ip_tables not found.
iptables v1.3.3: can't initialize iptables table `filter': iptables who? (do you need to insmod?)
Perhaps iptables or your kernel needs to be upgraded.
FATAL: Module ip_tables not found.
iptables v1.3.3: can't initialize iptables table `filter': iptables who? (do you need to insmod?)
Perhaps iptables or your kernel needs to be upgraded.
FATAL: Module ip_tables not found.
iptables v1.3.3: can't initialize iptables table `filter': iptables who? (do you need to insmod?)
Perhaps iptables or your kernel needs to be upgraded.
FATAL: Module ip_tables not found.
iptables v1.3.3: can't initialize iptables table `filter': iptables who? (do you need to insmod?)
Perhaps iptables or your kernel needs to be upgraded.
FATAL: Module ip_tables not found.
iptables v1.3.3: can't initialize iptables table `filter': iptables who? (do you need to insmod?)
Perhaps iptables or your kernel needs to be upgraded.
FATAL: Module ip_tables not found.
iptables v1.3.3: can't initialize iptables table `filter': iptables who? (do you need to insmod?)
Perhaps iptables or your kernel needs to be upgraded.
FATAL: Module ip_tables not found.
iptables v1.3.3: can't initialize iptables table `filter': iptables who? (do you need to insmod?)
Perhaps iptables or your kernel needs to be upgraded.
FATAL: Module ip_tables not found.
iptables v1.3.3: can't initialize iptables table `filter': iptables who? (do you need to insmod?)
Perhaps iptables or your kernel needs to be upgraded.
FATAL: Module ip_tables not found.
iptables v1.3.3: can't initialize iptables table `filter': iptables who? (do you need to insmod?)
Perhaps iptables or your kernel needs to be upgraded.
FATAL: Module ip_tables not found.
iptables v1.3.3: can't initialize iptables table `filter': iptables who? (do you need to insmod?)
Perhaps iptables or your kernel needs to be upgraded.
FATAL: Module ip_tables not found.
iptables v1.3.3: can't initialize iptables table `filter': iptables who? (do you need to insmod?)
Perhaps iptables or your kernel needs to be upgraded.
FATAL: Module ip_tables not found.
iptables v1.3.3: can't initialize iptables table `filter': iptables who? (do you need to insmod?)
Perhaps iptables or your kernel needs to be upgraded.
FATAL: Module ip_tables not found.
iptables v1.3.3: can't initialize iptables table `filter': iptables who? (do you need to insmod?)
Perhaps iptables or your kernel needs to be upgraded.
FATAL: Module ip_tables not found.
iptables v1.3.3: can't initialize iptables table `filter': iptables who? (do you need to insmod?)
Perhaps iptables or your kernel needs to be upgraded.
FATAL: Module ip_tables not found.
iptables v1.3.3: can't initialize iptables table `filter': iptables who? (do you need to insmod?)
Perhaps iptables or your kernel needs to be upgraded.
FATAL: Module ip_tables not found.
iptables v1.3.3: can't initialize iptables table `filter': iptables who? (do you need to insmod?)
Perhaps iptables or your kernel needs to be upgraded.
FATAL: Module ip_tables not found.
iptables v1.3.3: can't initialize iptables table `filter': iptables who? (do you need to insmod?)
Perhaps iptables or your kernel needs to be upgraded.
FATAL: Module ip_tables not found.
iptables v1.3.3: can't initialize iptables table `filter': iptables who? (do you need to insmod?)
Perhaps iptables or your kernel needs to be upgraded.
FATAL: Module ip_tables not found.
iptables v1.3.3: can't initialize iptables table `filter': iptables who? (do you need to insmod?)
Perhaps iptables or your kernel needs to be upgraded.
FATAL: Module ip_tables not found.
iptables v1.3.3: can't initialize iptables table `filter': iptables who? (do you need to insmod?)
Perhaps iptables or your kernel needs to be upgraded.
FATAL: Module ip_tables not found.
iptables v1.3.3: can't initialize iptables table `filter': iptables who? (do you need to insmod?)
Perhaps iptables or your kernel needs to be upgraded.
FATAL: Module ip_tables not found.
iptables v1.3.3: can't initialize iptables table `filter': iptables who? (do you need to insmod?)
Perhaps iptables or your kernel needs to be upgraded.
FATAL: Module ip_tables not found.
iptables v1.3.3: can't initialize iptables table `filter': iptables who? (do you need to insmod?)
Perhaps iptables or your kernel needs to be upgraded.
FATAL: Module ip_tables not found.
iptables v1.3.3: can't initialize iptables table `filter': iptables who? (do you need to insmod?)
Perhaps iptables or your kernel needs to be upgraded.
FATAL: Module ip_tables not found.
iptables v1.3.3: can't initialize iptables table `filter': iptables who? (do you need to insmod?)
Perhaps iptables or your kernel needs to be upgraded.
FATAL: Module ip_tables not found.
iptables v1.3.3: can't initialize iptables table `filter': iptables who? (do you need to insmod?)
Perhaps iptables or your kernel needs to be upgraded.
FATAL: Module ip_tables not found.
iptables v1.3.3: can't initialize iptables table `filter': iptables who? (do you need to insmod?)
Perhaps iptables or your kernel needs to be upgraded.
FATAL: Module ip_tables not found.
iptables v1.3.3: can't initialize iptables table `filter': iptables who? (do you need to insmod?)
Perhaps iptables or your kernel needs to be upgraded.
FATAL: Module ip_tables not found.
iptables v1.3.3: can't initialize iptables table `filter': iptables who? (do you need to insmod?)
Perhaps iptables or your kernel needs to be upgraded.
FATAL: Module ip_tables not found.
iptables v1.3.3: can't initialize iptables table `filter': iptables who? (do you need to insmod?)
Perhaps iptables or your kernel needs to be upgraded.
done
Master Resource Control: runlevel 5 has been reached
Failed services in runlevel 5: acpid microcode
Skipped services in runlevel 5: smbfs nfs splash
killproc: kill(1563,3)　　　　　　

在编译.config前出现的提示是：

linux:/linux-2.6.16 # make menuconfig
   HOSTCC  scripts/basic/fixdep
   HOSTCC  scripts/basic/split-include
   HOSTCC  scripts/basic/docproc
   HOSTCC  scripts/kconfig/conf.o
   HOSTCC  scripts/kconfig/kxgettext.o
   HOSTCC  scripts/kconfig/mconf.o
   SHIPPED scripts/kconfig/zconf.tab.c
   SHIPPED scripts/kconfig/lex.zconf.c
   SHIPPED scripts/kconfig/zconf.hash.c
   HOSTCC  scripts/kconfig/zconf.tab.o
   HOSTLD  scripts/kconfig/mconf
   HOSTCC  scripts/kconfig/lxdialog/checklist.o
   HOSTCC  scripts/kconfig/lxdialog/inputbox.o
   HOSTCC  scripts/kconfig/lxdialog/lxdialog.o
   HOSTCC  scripts/kconfig/lxdialog/menubox.o
   HOSTCC  scripts/kconfig/lxdialog/msgbox.o
   HOSTCC  scripts/kconfig/lxdialog/textbox.o
   HOSTCC  scripts/kconfig/lxdialog/util.o
   HOSTCC  scripts/kconfig/lxdialog/yesno.o
   HOSTLD  scripts/kconfig/lxdialog/lxdialog
scripts/kconfig/mconf arch/i386/Kconfig
#
# using defaults found in /boot/config-2.6.13-15-default
#
/boot/config-2.6.13-15-default:16:warning: trying to assign nonexistent symbol CLEAN_COMPILE
/boot/config-2.6.13-15-default:24:warning: trying to assign nonexistent symbol SUSE_KERNEL
/boot/config-2.6.13-15-default:34:warning: trying to assign nonexistent symbol KOBJECT_UEVENT
/boot/config-2.6.13-15-default:118:warning: trying to assign nonexistent symbol X86_APIC_OFF
/boot/config-2.6.13-15-default:141:warning: trying to assign nonexistent symbol PROC_MM
/boot/config-2.6.13-15-default:174:warning: trying to assign nonexistent symbol ACPI_BOOT
/boot/config-2.6.13-15-default:175:warning: trying to assign nonexistent symbol ACPI_INTERPRETER
/boot/config-2.6.13-15-default:190:warning: trying to assign nonexistent symbol ACPI_SONY
/boot/config-2.6.13-15-default:191:warning: trying to assign nonexistent symbol ACPI_PCC
/boot/config-2.6.13-15-default:195:warning: trying to assign nonexistent symbol ACPI_DEBUG_LITE
/boot/config-2.6.13-15-default:196:warning: trying to assign nonexistent symbol ACPI_BUS
/boot/config-2.6.13-15-default:199:warning: trying to assign nonexistent symbol ACPI_PCI
/boot/config-2.6.13-15-default:203:warning: trying to assign nonexistent symbol ACPI_INITRD
/boot/config-2.6.13-15-default:276:warning: trying to assign nonexistent symbol PCI_NAMES
/boot/config-2.6.13-15-default:370:warning: trying to assign nonexistent symbol IP_TCPDIAG
/boot/config-2.6.13-15-default:371:warning: trying to assign nonexistent symbol IP_TCPDIAG_IPV6
/boot/config-2.6.13-15-default:442:warning: trying to assign nonexistent symbol IP_NF_MATCH_LIMIT
/boot/config-2.6.13-15-default:444:warning: trying to assign nonexistent symbol IP_NF_MATCH_MAC
/boot/config-2.6.13-15-default:445:warning: trying to assign nonexistent symbol IP_NF_MATCH_PKTTYPE
/boot/config-2.6.13-15-default:447:warning: trying to assign nonexistent symbol IP_NF_MATCH_MARK
/boot/config-2.6.13-15-default:454:warning: trying to assign nonexistent symbol IP_NF_MATCH_LENGTH
/boot/config-2.6.13-15-default:456:warning: trying to assign nonexistent symbol IP_NF_MATCH_TCPMSS
/boot/config-2.6.13-15-default:457:warning: trying to assign nonexistent symbol IP_NF_MATCH_HELPER
/boot/config-2.6.13-15-default:458:warning: trying to assign nonexistent symbol IP_NF_MATCH_STATE
/boot/config-2.6.13-15-default:459:warning: trying to assign nonexistent symbol IP_NF_MATCH_CONNTRACK
/boot/config-2.6.13-15-default:461:warning: trying to assign nonexistent symbol IP_NF_MATCH_PHYSDEV
/boot/config-2.6.13-15-default:463:warning: trying to assign nonexistent symbol IP_NF_MATCH_REALM
/boot/config-2.6.13-15-default:464:warning: trying to assign nonexistent symbol IP_NF_MATCH_SCTP
/boot/config-2.6.13-15-default:465:warning: trying to assign nonexistent symbol IP_NF_MATCH_COMMENT
/boot/config-2.6.13-15-default:466:warning: trying to assign nonexistent symbol IP_NF_MATCH_CONNMARK
/boot/config-2.6.13-15-default:488:warning: trying to assign nonexistent symbol IP_NF_TARGET_MARK
/boot/config-2.6.13-15-default:490:warning: trying to assign nonexistent symbol IP_NF_TARGET_CLASSIFY
/boot/config-2.6.13-15-default:491:warning: trying to assign nonexistent symbol IP_NF_TARGET_CONNMARK
/boot/config-2.6.13-15-default:494:warning: trying to assign nonexistent symbol IP_NF_TARGET_NOTRACK
/boot/config-2.6.13-15-default:505:warning: trying to assign nonexistent symbol IP6_NF_MATCH_LIMIT
/boot/config-2.6.13-15-default:506:warning: trying to assign nonexistent symbol IP6_NF_MATCH_MAC
/boot/config-2.6.13-15-default:514:warning: trying to assign nonexistent symbol IP6_NF_MATCH_MARK
/boot/config-2.6.13-15-default:517:warning: trying to assign nonexistent symbol IP6_NF_MATCH_LENGTH
/boot/config-2.6.13-15-default:519:warning: trying to assign nonexistent symbol IP6_NF_MATCH_PHYSDEV
/boot/config-2.6.13-15-default:524:warning: trying to assign nonexistent symbol IP6_NF_TARGET_MARK
/boot/config-2.6.13-15-default:624:warning: trying to assign nonexistent symbol NET_QOS
/boot/config-2.6.13-15-default:758:warning: trying to assign nonexistent symbol BT_HCIUART_BCSP_TXCRC
/boot/config-2.6.13-15-default:979:warning: trying to assign nonexistent symbol CIPHER_TWOFISH
/boot/config-2.6.13-15-default:1047:warning: trying to assign nonexistent symbol PDC202XX_FORCE
/boot/config-2.6.13-15-default:1102:warning: trying to assign nonexistent symbol ISCSI_TARGET
/boot/config-2.6.13-15-default:1182:warning: trying to assign nonexistent symbol SCSI_QLOGIC_1280_1040/boot/config-2.6.13-15-default:1183:warning: trying to assign nonexistent symbol SCSI_QLA2XXX
/boot/config-2.6.13-15-default:1191:warning: trying to assign nonexistent symbol SCSI_QLA4XXX
/boot/config-2.6.13-15-default:1192:warning: trying to assign nonexistent symbol SCSI_QLA4XXX_FAILOVER/boot/config-2.6.13-15-default:1289:warning: trying to assign nonexistent symbol IEEE1394_CMP
/boot/config-2.6.13-15-default:1290:warning: trying to assign nonexistent symbol IEEE1394_AMDTP
/boot/config-2.6.13-15-default:1434:warning: trying to assign nonexistent symbol SK98LIN_NAPI
/boot/config-2.6.13-15-default:1446:warning: trying to assign nonexistent symbol 2BUFF_MODE
/boot/config-2.6.13-15-default:1858:warning: trying to assign nonexistent symbol ECC
/boot/config-2.6.13-15-default:2048:warning: trying to assign nonexistent symbol LIRC_SUPPORT
/boot/config-2.6.13-15-default:2049:warning: trying to assign nonexistent symbol LIRC_MAX_DEV
/boot/config-2.6.13-15-default:2050:warning: trying to assign nonexistent symbol LIRC_I2C
/boot/config-2.6.13-15-default:2051:warning: trying to assign nonexistent symbol LIRC_GPIO
/boot/config-2.6.13-15-default:2052:warning: trying to assign nonexistent symbol LIRC_PARALLEL
/boot/config-2.6.13-15-default:2053:warning: trying to assign nonexistent symbol LIRC_SERIAL
/boot/config-2.6.13-15-default:2099:warning: trying to assign nonexistent symbol I2C_SENSOR
/boot/config-2.6.13-15-default:2301:warning: trying to assign nonexistent symbol DVB_TDA80XX
/boot/config-2.6.13-15-default:2323:warning: trying to assign nonexistent symbol DVB_ATMEL_AT76C651
/boot/config-2.6.13-15-default:2331:warning: trying to assign nonexistent symbol DVB_NXT2002
/boot/config-2.6.13-15-default:2353:warning: trying to assign nonexistent symbol FB_SOFT_CURSOR
/boot/config-2.6.13-15-default:2387:warning: trying to assign nonexistent symbol FB_ATY_XL_INIT
/boot/config-2.6.13-15-default:2431:warning: trying to assign nonexistent symbol BOOTSPLASH
/boot/config-2.6.13-15-default:2455:warning: trying to assign nonexistent symbol SND_DEBUG_MEMORY
/boot/config-2.6.13-15-default:2457:warning: trying to assign nonexistent symbol SND_GENERIC_PM
/boot/config-2.6.13-15-default:2765:warning: trying to assign nonexistent symbol USB_GENESYS
/boot/config-2.6.13-15-default:2766:warning: trying to assign nonexistent symbol USB_NET1080
/boot/config-2.6.13-15-default:2767:warning: trying to assign nonexistent symbol USB_PL2301
/boot/config-2.6.13-15-default:2768:warning: trying to assign nonexistent symbol USB_KC2190
/boot/config-2.6.13-15-default:2775:warning: trying to assign nonexistent symbol USB_ZAURUS
/boot/config-2.6.13-15-default:2776:warning: trying to assign nonexistent symbol USB_CDCETHER
/boot/config-2.6.13-15-default:2781:warning: trying to assign nonexistent symbol USB_AX8817X
/boot/config-2.6.13-15-default:2881:warning: trying to assign nonexistent symbol INFINIBAND_USER_VERBS/boot/config-2.6.13-15-default:2907:warning: trying to assign nonexistent symbol REISER4_FS
/boot/config-2.6.13-15-default:2908:warning: trying to assign nonexistent symbol REISER4_DEBUG
/boot/config-2.6.13-15-default:2940:warning: trying to assign nonexistent symbol SUBFS_FS
/boot/config-2.6.13-15-default:2973:warning: trying to assign nonexistent symbol DEVPTS_FS_XATTR
/boot/config-2.6.13-15-default:2974:warning: trying to assign nonexistent symbol DEVPTS_FS_SECURITY
/boot/config-2.6.13-15-default:2976:warning: trying to assign nonexistent symbol TMPFS_XATTR
/boot/config-2.6.13-15-default:2977:warning: trying to assign nonexistent symbol TMPFS_POSIX_ACL
/boot/config-2.6.13-15-default:2978:warning: trying to assign nonexistent symbol TMPFS_SECURITY
/boot/config-2.6.13-15-default:3061:warning: trying to assign nonexistent symbol GENERIC_ACL
/boot/config-2.6.13-15-default:3162:warning: trying to assign nonexistent symbol KDB
/boot/config-2.6.13-15-default:3180:warning: trying to assign nonexistent symbol SECURITY_SUBDOMAIN
/boot/config-2.6.13-15-default:3230:warning: trying to assign nonexistent symbol PC


*** End of Linux kernel configuration.
*** Execute 'make' to build the kernel or try 'make help'.