如题：我的机器升级了。其他一切正常。我用的是磐正5LDA+ GLI 主板。集成 ALC 880 八声道声卡。显卡使用双敏 速配 PCX 7628 GT ，可是安装MDV 2006 PW 完成时候配置了显卡和显示器，并测试成功，声卡默认没有配置。可是重新启动后第一次进入系统，发现不行，症状是： 显示器亮了 又黑，同时键盘的NUM 灯一起亮了又黑，于是重新启动，并用光盘引导，升级。这次显卡和声卡都没有配置。在重新启动，第一次进入系统，显卡正常。但是声卡有问题。就是不发声，怎么配置都不发声。郁闷。依刚老大。能不能提供一个声卡的驱动。最好是 RPM 包的。现在还在无声的世界里。郁闷的很。在线等。请依刚老大查一下我的主板信息。然后热情的帮助我。寻找声卡驱动。谢谢连～～～～～～　　　　　　

依刚到底来不来呀。这里怎么没有人了 。　　　　　　

[root@localhost ~]# lspci
00:00.0 Host bridge: Intel Corporation 945G/P Memory Controller Hub (rev 81)
00:01.0 PCI bridge: Intel Corporation 945G/P PCI Express Graphics Port (rev 81)
00:1b.0 Class 0403: Intel Corporation 82801G (ICH7 Family) High Definition Audio
Controller (rev 01)
00:1c.0 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1 (r
ev 01)
00:1c.4 PCI bridge: Intel Corporation 82801GR/GH/GHM (ICH7 Family) PCI Express P
ort 5 (rev 01)
00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #1 (rev
01)
00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #2 (rev
01)
00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #3 (rev                                              01)
00:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #4 (rev                                              01)
00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Control                                             ler (rev 01)
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev e1)
00:1f.0 ISA bridge: Intel Corporation 82801GB/GR (ICH7 Family) LPC Interface Bri                                             dge (rev 01)
00:1f.1 IDE interface: Intel Corporation 82801G (ICH7 Family) IDE Controller (re                                             v 01)
00:1f.2 IDE interface: Intel Corporation 82801GB/GR/GH (ICH7 Family) Serial ATA                                              Storage Controllers cc=IDE (rev 01)
00:1f.3 SMBus: Intel Corporation 82801G (ICH7 Family) SMBus Controller (rev 01)
01:00.0 VGA compatible controller: nVidia Corporation: Unknown device 0391 (rev                                              a1)
03:00.0 Ethernet controller: Marvell Technology Group Ltd. 88E8053 Gigabit Ether                                             net Controller (rev 15)
04:00.0 RAID bus controller: Triones Technologies, Inc. HPT374 (rev 07)
04:00.1 RAID bus controller: Triones Technologies, Inc. HPT374 (rev 07)
04:03.0 FireWire (IEEE 1394): VIA Technologies, Inc. IEEE 1394 Host Controller (                                             rev 80)　　　　　　

http://www.realtek.com.tw/downlo ... 1&Software=True

哈哈，官方的驱动也不是rpm的。　　　　　　

你先装装看，有问题贴出来~~　　　　　　

你才来昂。我都开始下载DEBIAN 了。都下了50%了，DVD 版本的。两DVD 。我先看看行包。等在下载。　　　　　　

[root@localhost a]# make install
Making install in include
make[1]: Entering directory `/tmp/rel/a/include'
make[2]: Entering directory `/tmp/rel/a/include'
make[2]: Nothing to be done for `install-exec-am'.
make[2]: Nothing to be done for `install-data-am'.
make[2]: Leaving directory `/tmp/rel/a/include'
make[1]: Leaving directory `/tmp/rel/a/include'
Making install in alsactl
make[1]: Entering directory `/tmp/rel/a/alsactl'
if gcc -DHAVE_CONFIG_H -I. -I. -I../include     -g -O2 -MT alsactl.o -MD -MP -MF ".deps/alsactl.Tpo" \
  -c -o alsactl.o `test -f 'alsactl.c' || echo './'`alsactl.c; \
then mv -f ".deps/alsactl.Tpo" ".deps/alsactl.Po"; \
else rm -f ".deps/alsactl.Tpo"; exit 1; \
fi
if gcc -DHAVE_CONFIG_H -I. -I. -I../include     -g -O2 -MT state.o -MD -MP -MF ".deps/state.Tpo" \
  -c -o state.o `test -f 'state.c' || echo './'`state.c; \
then mv -f ".deps/state.Tpo" ".deps/state.Po"; \
else rm -f ".deps/state.Tpo"; exit 1; \
fi
if gcc -DHAVE_CONFIG_H -I. -I. -I../include     -g -O2 -MT power.o -MD -MP -MF ".deps/power.Tpo" \
  -c -o power.o `test -f 'power.c' || echo './'`power.c; \
then mv -f ".deps/power.Tpo" ".deps/power.Po"; \
else rm -f ".deps/power.Tpo"; exit 1; \
fi
if gcc -DHAVE_CONFIG_H -I. -I. -I../include     -g -O2 -MT names.o -MD -MP -MF ".deps/names.Tpo" \
  -c -o names.o `test -f 'names.c' || echo './'`names.c; \
then mv -f ".deps/names.Tpo" ".deps/names.Po"; \
else rm -f ".deps/names.Tpo"; exit 1; \
fi
gcc  -g -O2   -o alsactl  alsactl.o state.o power.o names.o  -lasound -lm -ldl -lpthread
make[2]: Entering directory `/tmp/rel/a/alsactl'
/bin/sh ../mkinstalldirs /usr/sbin
  /usr/bin/install -c alsactl /usr/sbin/alsactl
/bin/sh ../mkinstalldirs /usr/man/man1
/usr/bin/install -c -m 644 ./alsactl.1 /usr/man/man1/alsactl.1
make[2]: Leaving directory `/tmp/rel/a/alsactl'
make[1]: Leaving directory `/tmp/rel/a/alsactl'
Making install in alsaconf
make[1]: Entering directory `/tmp/rel/a/alsaconf'
Making install in po
make[2]: Entering directory `/tmp/rel/a/alsaconf/po'
mkdir -p -- /usr/share
make[2]: Leaving directory `/tmp/rel/a/alsaconf/po'
make[2]: Entering directory `/tmp/rel/a/alsaconf'
make[3]: Entering directory `/tmp/rel/a/alsaconf'
/bin/sh ../mkinstalldirs /usr/sbin
/usr/bin/install -c alsaconf /usr/sbin/alsaconf
/usr/bin/install -c -m 644 alsaconf.8 /usr/man/man8/alsaconf.8
/usr/bin/install -c -m 644 alsaconf.fr.8 /usr/man/fr/man8/alsaconf.8
make[3]: Leaving directory `/tmp/rel/a/alsaconf'
make[2]: Leaving directory `/tmp/rel/a/alsaconf'
make[1]: Leaving directory `/tmp/rel/a/alsaconf'
Making install in alsamixer
make[1]: Entering directory `/tmp/rel/a/alsamixer'
if gcc -DHAVE_CONFIG_H -I. -I. -I../include     -g -O2 -MT alsamixer.o -MD -MP -MF ".deps/alsamixer.Tpo" \
  -c -o alsamixer.o `test -f 'alsamixer.c' || echo './'`alsamixer.c; \
then mv -f ".deps/alsamixer.Tpo" ".deps/alsamixer.Po"; \
else rm -f ".deps/alsamixer.Tpo"; exit 1; \
fi
alsamixer.c: In function 'update_enum_list':
alsamixer.c:539: warning: pointer targets in passing argument 3 of 'snd_mixer_selem_get_enum_item' differ in signedness
alsamixer.c: In function 'display_enum_list':
alsamixer.c:797: warning: pointer targets in passing argument 3 of 'snd_mixer_selem_get_enum_item' differ in signedness
gcc  -g -O2   -o alsamixer  alsamixer.o -lncurses -lasound -lm -ldl -lpthread
make[2]: Entering directory `/tmp/rel/a/alsamixer'
/bin/sh ../mkinstalldirs /usr/bin
  /usr/bin/install -c alsamixer /usr/bin/alsamixer
/bin/sh ../mkinstalldirs /usr/man/man1
/usr/bin/install -c -m 644 ./alsamixer.1 /usr/man/man1/alsamixer.1
make[2]: Leaving directory `/tmp/rel/a/alsamixer'
make[1]: Leaving directory `/tmp/rel/a/alsamixer'
Making install in amidi
make[1]: Entering directory `/tmp/rel/a/amidi'
if gcc -DHAVE_CONFIG_H -I. -I. -I../include -I../include    -g -O2 -MT amidi.o -MD -MP -MF ".deps/amidi.Tpo" \
  -c -o amidi.o `test -f 'amidi.c' || echo './'`amidi.c; \
then mv -f ".deps/amidi.Tpo" ".deps/amidi.Po"; \
else rm -f ".deps/amidi.Tpo"; exit 1; \
fi
gcc  -g -O2   -o amidi  amidi.o  -lasound -lm -ldl -lpthread
make[2]: Entering directory `/tmp/rel/a/amidi'
/bin/sh ../mkinstalldirs /usr/bin
  /usr/bin/install -c amidi /usr/bin/amidi
/bin/sh ../mkinstalldirs /usr/man/man1
/usr/bin/install -c -m 644 ./amidi.1 /usr/man/man1/amidi.1
make[2]: Leaving directory `/tmp/rel/a/amidi'
make[1]: Leaving directory `/tmp/rel/a/amidi'
Making install in amixer
make[1]: Entering directory `/tmp/rel/a/amixer'
if gcc -DHAVE_CONFIG_H -I. -I. -I../include -I../include    -g -O2 -MT amixer.o -MD -MP -MF ".deps/amixer.Tpo" \
  -c -o amixer.o `test -f 'amixer.c' || echo './'`amixer.c; \
then mv -f ".deps/amixer.Tpo" ".deps/amixer.Po"; \
else rm -f ".deps/amixer.Tpo"; exit 1; \
fi
gcc  -g -O2   -o amixer  amixer.o -lm -lasound -lm -ldl -lpthread
make[2]: Entering directory `/tmp/rel/a/amixer'
/bin/sh ../mkinstalldirs /usr/bin
  /usr/bin/install -c amixer /usr/bin/amixer
/bin/sh ../mkinstalldirs /usr/man/man1
/usr/bin/install -c -m 644 ./amixer.1 /usr/man/man1/amixer.1
make[2]: Leaving directory `/tmp/rel/a/amixer'
make[1]: Leaving directory `/tmp/rel/a/amixer'
Making install in aplay
make[1]: Entering directory `/tmp/rel/a/aplay'
if gcc -DHAVE_CONFIG_H -I. -I. -I../include -I../include    -g -O2 -MT aplay.o -MD -MP -MF ".deps/aplay.Tpo" \
  -c -o aplay.o `test -f 'aplay.c' || echo './'`aplay.c; \
then mv -f ".deps/aplay.Tpo" ".deps/aplay.Po"; \
else rm -f ".deps/aplay.Tpo"; exit 1; \
fi
aplay.c: In function 'voc_pcm_write':
aplay.c:1324: warning: pointer targets in passing argument 1 of 'pcm_write' differ in signedness
aplay.c: In function 'voc_write_silence':
aplay.c:1347: warning: pointer targets in passing argument 1 of 'voc_pcm_write' differ in signedness
aplay.c: In function 'voc_pcm_flush':
aplay.c:1367: warning: pointer targets in passing argument 1 of 'pcm_write' differ in signedness
aplay.c: In function 'playback_go':
aplay.c:1863: warning: pointer targets in passing argument 1 of 'pcm_write' differ in signedness
aplay.c:1892: warning: pointer targets in passing argument 1 of 'pcm_write' differ in signedness
aplay.c: In function 'capture_go':
aplay.c:1917: warning: pointer targets in passing argument 1 of 'pcm_read' differ in signedness
aplay.c: In function 'playbackv_go':
aplay.c:2035: warning: pointer targets in assignment differ in signedness
aplay.c: In function 'capturev_go':
aplay.c:2082: warning: pointer targets in assignment differ in signedness
gcc  -g -O2   -o aplay  aplay.o -lasound -lasound -lm -ldl -lpthread
make[2]: Entering directory `/tmp/rel/a/aplay'
/bin/sh ../mkinstalldirs /usr/bin
  /usr/bin/install -c aplay /usr/bin/aplay
make  install-exec-hook
make[3]: Entering directory `/tmp/rel/a/aplay'
rm -f /usr/bin/arecord
(cd /usr/bin && ln -s aplay arecord)
make[3]: Leaving directory `/tmp/rel/a/aplay'
/bin/sh ../mkinstalldirs /usr/man/man1
/usr/bin/install -c -m 644 ./aplay.1 /usr/man/man1/aplay.1
/usr/bin/install -c -m 644 ./arecord.1 /usr/man/man1/arecord.1
make  install-data-hook
make[3]: Entering directory `/tmp/rel/a/aplay'
rm -f /usr/man/man1/arecord.1
(cd /usr/man/man1 && ln -s aplay.1 arecord.1)
make[3]: Leaving directory `/tmp/rel/a/aplay'
make[2]: Leaving directory `/tmp/rel/a/aplay'
make[1]: Leaving directory `/tmp/rel/a/aplay'
Making install in iecset
make[1]: Entering directory `/tmp/rel/a/iecset'
if gcc -DHAVE_CONFIG_H -I. -I. -I../include -I../include    -g -O2 -MT iecset.o -MD -MP -MF ".deps/iecset.Tpo" \
  -c -o iecset.o `test -f 'iecset.c' || echo './'`iecset.c; \
then mv -f ".deps/iecset.Tpo" ".deps/iecset.Po"; \
else rm -f ".deps/iecset.Tpo"; exit 1; \
fi
if gcc -DHAVE_CONFIG_H -I. -I. -I../include -I../include    -g -O2 -MT iecbits.o -MD -MP -MF ".deps/iecbits.Tpo" \
  -c -o iecbits.o `test -f 'iecbits.c' || echo './'`iecbits.c; \
then mv -f ".deps/iecbits.Tpo" ".deps/iecbits.Po"; \
else rm -f ".deps/iecbits.Tpo"; exit 1; \
fi
gcc  -g -O2   -o iecset  iecset.o iecbits.o -lm -lasound -lm -ldl -lpthread
make[2]: Entering directory `/tmp/rel/a/iecset'
/bin/sh ../mkinstalldirs /usr/bin
  /usr/bin/install -c iecset /usr/bin/iecset
/bin/sh ../mkinstalldirs /usr/man/man1
/usr/bin/install -c -m 644 ./iecset.1 /usr/man/man1/iecset.1
make[2]: Leaving directory `/tmp/rel/a/iecset'
make[1]: Leaving directory `/tmp/rel/a/iecset'
Making install in seq
make[1]: Entering directory `/tmp/rel/a/seq'
Making install in aconnect
make[2]: Entering directory `/tmp/rel/a/seq/aconnect'
if gcc -DHAVE_CONFIG_H -I. -I. -I../../include -I../../include    -g -O2 -MT aconnect.o -MD -MP -MF ".deps/aconnect.Tpo" \
  -c -o aconnect.o `test -f 'aconnect.c' || echo './'`aconnect.c; \
then mv -f ".deps/aconnect.Tpo" ".deps/aconnect.Po"; \
else rm -f ".deps/aconnect.Tpo"; exit 1; \
fi
gcc  -g -O2   -o aconnect  aconnect.o  -lasound -lm -ldl -lpthread
make[3]: Entering directory `/tmp/rel/a/seq/aconnect'
/bin/sh ../../mkinstalldirs /usr/bin
  /usr/bin/install -c aconnect /usr/bin/aconnect
/bin/sh ../../mkinstalldirs /usr/man/man1
/usr/bin/install -c -m 644 ./aconnect.1 /usr/man/man1/aconnect.1
make[3]: Leaving directory `/tmp/rel/a/seq/aconnect'
make[2]: Leaving directory `/tmp/rel/a/seq/aconnect'
Making install in aplaymidi
make[2]: Entering directory `/tmp/rel/a/seq/aplaymidi'
if gcc -DHAVE_CONFIG_H -I. -I. -I../../include -I../../include    -g -O2 -MT aplaymidi.o -MD -MP -MF ".deps/aplaymidi.Tpo" \
  -c -o aplaymidi.o `test -f 'aplaymidi.c' || echo './'`aplaymidi.c; \
then mv -f ".deps/aplaymidi.Tpo" ".deps/aplaymidi.Po"; \
else rm -f ".deps/aplaymidi.Tpo"; exit 1; \
fi
gcc  -g -O2   -o aplaymidi  aplaymidi.o  -lasound -lm -ldl -lpthread
if gcc -DHAVE_CONFIG_H -I. -I. -I../../include -I../../include    -g -O2 -MT arecordmidi.o -MD -MP -MF ".deps/arecordmidi.Tpo" \
  -c -o arecordmidi.o `test -f 'arecordmidi.c' || echo './'`arecordmidi.c; \
then mv -f ".deps/arecordmidi.Tpo" ".deps/arecordmidi.Po"; \
else rm -f ".deps/arecordmidi.Tpo"; exit 1; \
fi
gcc  -g -O2   -o arecordmidi  arecordmidi.o  -lasound -lm -ldl -lpthread
make[3]: Entering directory `/tmp/rel/a/seq/aplaymidi'
/bin/sh ../../mkinstalldirs /usr/bin
  /usr/bin/install -c aplaymidi /usr/bin/aplaymidi
  /usr/bin/install -c arecordmidi /usr/bin/arecordmidi
/bin/sh ../../mkinstalldirs /usr/man/man1
/usr/bin/install -c -m 644 ./aplaymidi.1 /usr/man/man1/aplaymidi.1
/usr/bin/install -c -m 644 ./arecordmidi.1 /usr/man/man1/arecordmidi.1
make[3]: Leaving directory `/tmp/rel/a/seq/aplaymidi'
make[2]: Leaving directory `/tmp/rel/a/seq/aplaymidi'
Making install in aseqdump
make[2]: Entering directory `/tmp/rel/a/seq/aseqdump'
if gcc -DHAVE_CONFIG_H -I. -I. -I../../include -I../../include    -g -O2 -MT aseqdump.o -MD -MP -MF ".deps/aseqdump.Tpo" \
  -c -o aseqdump.o `test -f 'aseqdump.c' || echo './'`aseqdump.c; \
then mv -f ".deps/aseqdump.Tpo" ".deps/aseqdump.Po"; \
else rm -f ".deps/aseqdump.Tpo"; exit 1; \
fi
gcc  -g -O2   -o aseqdump  aseqdump.o  -lasound -lm -ldl -lpthread
make[3]: Entering directory `/tmp/rel/a/seq/aseqdump'
/bin/sh ../../mkinstalldirs /usr/bin
  /usr/bin/install -c aseqdump /usr/bin/aseqdump
/bin/sh ../../mkinstalldirs /usr/man/man1
/usr/bin/install -c -m 644 ./aseqdump.1 /usr/man/man1/aseqdump.1
make[3]: Leaving directory `/tmp/rel/a/seq/aseqdump'
make[2]: Leaving directory `/tmp/rel/a/seq/aseqdump'
Making install in aseqnet
make[2]: Entering directory `/tmp/rel/a/seq/aseqnet'
if gcc -DHAVE_CONFIG_H -I. -I. -I../../include -I../../include    -g -O2 -MT aseqnet.o -MD -MP -MF ".deps/aseqnet.Tpo" \
  -c -o aseqnet.o `test -f 'aseqnet.c' || echo './'`aseqnet.c; \
then mv -f ".deps/aseqnet.Tpo" ".deps/aseqnet.Po"; \
else rm -f ".deps/aseqnet.Tpo"; exit 1; \
fi
aseqnet.c: In function 'start_connection':
aseqnet.c:373: warning: pointer targets in passing argument 3 of 'accept' differ in signedness
gcc  -g -O2   -o aseqnet  aseqnet.o  -lasound -lm -ldl -lpthread
make[3]: Entering directory `/tmp/rel/a/seq/aseqnet'
/bin/sh ../../mkinstalldirs /usr/bin
  /usr/bin/install -c aseqnet /usr/bin/aseqnet
/bin/sh ../../mkinstalldirs /usr/man/man1
/usr/bin/install -c -m 644 ./aseqnet.1 /usr/man/man1/aseqnet.1
make[3]: Leaving directory `/tmp/rel/a/seq/aseqnet'
make[2]: Leaving directory `/tmp/rel/a/seq/aseqnet'
make[2]: Entering directory `/tmp/rel/a/seq'
make[3]: Entering directory `/tmp/rel/a/seq'
make[3]: Nothing to be done for `install-exec-am'.
make[3]: Nothing to be done for `install-data-am'.
make[3]: Leaving directory `/tmp/rel/a/seq'
make[2]: Leaving directory `/tmp/rel/a/seq'
make[1]: Leaving directory `/tmp/rel/a/seq'
Making install in speaker-test
make[1]: Entering directory `/tmp/rel/a/speaker-test'
Making install in samples
make[2]: Entering directory `/tmp/rel/a/speaker-test/samples'
make[3]: Entering directory `/tmp/rel/a/speaker-test/samples'
make[3]: Nothing to be done for `install-exec-am'.
/bin/sh ../../mkinstalldirs /usr/share/alsa/speaker-test
/usr/bin/install -c -m 644 sample_map.csv /usr/share/alsa/speaker-test/sample_map.csv
/bin/sh ../../mkinstalldirs /usr/share/sounds/alsa
/usr/bin/install -c -m 644 Front_Left.wav /usr/share/sounds/alsa/Front_Left.wav
/usr/bin/install -c -m 644 Rear_Center.wav /usr/share/sounds/alsa/Rear_Center.wav
/usr/bin/install -c -m 644 Rear_Right.wav /usr/share/sounds/alsa/Rear_Right.wav
/usr/bin/install -c -m 644 Side_Right.wav /usr/share/sounds/alsa/Side_Right.wav
/usr/bin/install -c -m 644 Front_Center.wav /usr/share/sounds/alsa/Front_Center.wav
/usr/bin/install -c -m 644 Front_Right.wav /usr/share/sounds/alsa/Front_Right.wav
/usr/bin/install -c -m 644 Noise.wav /usr/share/sounds/alsa/Noise.wav
/usr/bin/install -c -m 644 Rear_Left.wav /usr/share/sounds/alsa/Rear_Left.wav
/usr/bin/install -c -m 644 Side_Left.wav /usr/share/sounds/alsa/Side_Left.wav
make[3]: Leaving directory `/tmp/rel/a/speaker-test/samples'
make[2]: Leaving directory `/tmp/rel/a/speaker-test/samples'
make[2]: Entering directory `/tmp/rel/a/speaker-test'
if gcc -DHAVE_CONFIG_H -I. -I. -I../include -I../include -DVERSION=\"0.0.8\"    -g -O2 -MT speaker-test.o -MD -MP -MF ".deps/speaker-test.Tpo" \
  -c -o speaker-test.o `test -f 'speaker-test.c' || echo './'`speaker-test.c; \
then mv -f ".deps/speaker-test.Tpo" ".deps/speaker-test.Po"; \
else rm -f ".deps/speaker-test.Tpo"; exit 1; \
fi
gcc  -g -O2   -o speaker-test  speaker-test.o pink.o  -lasound -lm -ldl -lpthread
make[3]: Entering directory `/tmp/rel/a/speaker-test'
/bin/sh ../mkinstalldirs /usr/bin
  /usr/bin/install -c speaker-test /usr/bin/speaker-test
/bin/sh ../mkinstalldirs /usr/man/man1
/usr/bin/install -c -m 644 ./speaker-test.1 /usr/man/man1/speaker-test.1
make[3]: Leaving directory `/tmp/rel/a/speaker-test'
make[2]: Leaving directory `/tmp/rel/a/speaker-test'
make[1]: Leaving directory `/tmp/rel/a/speaker-test'
Making install in utils
make[1]: Entering directory `/tmp/rel/a/utils'
make[2]: Entering directory `/tmp/rel/a/utils'
make[2]: Nothing to be done for `install-exec-am'.
make[2]: Nothing to be done for `install-data-am'.
make[2]: Leaving directory `/tmp/rel/a/utils'
make[1]: Leaving directory `/tmp/rel/a/utils'
Making install in m4
make[1]: Entering directory `/tmp/rel/a/m4'
make[2]: Entering directory `/tmp/rel/a/m4'
make[2]: Nothing to be done for `install-exec-am'.
make[2]: Nothing to be done for `install-data-am'.
make[2]: Leaving directory `/tmp/rel/a/m4'
make[1]: Leaving directory `/tmp/rel/a/m4'
make[1]: Entering directory `/tmp/rel/a'
make[2]: Entering directory `/tmp/rel/a'
make[2]: Nothing to be done for `install-exec-am'.
make[2]: Nothing to be done for `install-data-am'.
make[2]: Leaving directory `/tmp/rel/a'
make[1]: Leaving directory `/tmp/rel/a'
[root@localhost a]#　　　　　　

DEBIAN是好东西，我现在就用这个呢。

make[2]: Nothing to be done for `install-exec-am'.
make[2]: Nothing to be done for `install-data-am'.

从你的makeinstall中没有发现明显错误，上面两句意思是不能没有应用install-exec-am和install-data-am，可能这两个文件是他的默认配置文件。有三种可能：

1。在前期的make中程序检测设备，提取数据，写入这两个文件

2。make install时加参数，写入这两个文件

3。第一次应用驱动的时候，程序检测设备，提取数据，写入这两个文件。

还有一种不成功的可能：驱动没有找到设备，一家人不认一家人了。　　　　　　

直接给我个RPM 的包不久行了吗。或者你找你的高手哥们为我打个包吧 。MDV 我的最爱。DEBIAN 直接不支持RAID ，连装都装不上。还声卡。完蛋去吧 。　　　　　　

既然官方没有给rpm肯定有它的道理，可能是要根据你硬件的情况进行检测等等的安装前的工作。用rpm肯定不合适。你把readme贴出来，我研究一下