Fedora Core 8网卡有问题(FC8 网络)

便携装了FC8,但是发现网络有问题ING不通局域网地址,只能PING自己的地址和127.0.0.1。局域网通过路由器上网，确定INTERNET是通的。以下是dmesg,ifconfig -a,lspci,netstat -rn和执行/etc/init.d/network restart时的所有输出，希望专家给予指导。多谢先！
[root@Infinite ~]# dmesg
Linux version 2.6.23.1-42.fc8 (kojibuilder@xenbuilder4.fedora.phx.redhat.com) (gcc version 4.1.2 20070925 (Red Hat 4.1.2-33)) #1 SMP Tue Oct 30 13:55:12 EDT 2007
BIOS-provided physical RAM map:

BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)

BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)

BIOS-e820: 00000000000d0000 - 00000000000d6000 (reserved)

BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)

BIOS-e820: 0000000000100000 - 000000000dff0000 (usable)

BIOS-e820: 000000000dff0000 - 000000000dff8000 (ACPI data)

BIOS-e820: 000000000dff8000 - 000000000e000000 (ACPI NVS)

BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
0MB HIGHMEM available.
223MB LOWMEM available.
Using x86 segment limits to approximate NX protection
Entering add_active_range(0, 0, 57328) 0 entries of 256 used
Zone PFN ranges:

DMA
0 ->
4096

Normal
4096 ->
57328

HighMem
57328 ->
57328
Movable zone start PFN for each node
early_node_map[1] active PFN ranges

0:
0 ->
57328
On node 0 totalpages: 57328

DMA zone: 32 pages used for memmap

DMA zone: 0 pages reserved

DMA zone: 4064 pages, LIFO batch:0

Normal zone: 415 pages used for memmap

Normal zone: 52817 pages, LIFO batch:15

HighMem zone: 0 pages used for memmap

Movable zone: 0 pages used for memmap
DMI 2.3 present.
Using APIC driver default
ACPI: RSDP 000FA2D0, 0014 (r0 AMI
)
ACPI: RSDT 0DFF0000, 0028 (r1 AMIINT VIA_K7
10 MSFT
97)
ACPI: FACP 0DFF0030, 0081 (r1 AMIINT VIA_K7
11 MSFT
97)
ACPI: DSDT 0DFF00C0, 46E6 (r1
VIA
VIA_K7
1000 INTL
2002024)
ACPI: FACS 0DFF8000, 0040
ACPI: PM-Timer IO Port: 0x808
Allocating PCI resources starting at 10000000 (gap: 0e000000:f1f80000)
swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000
swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000d0000
swsusp: Registered nosave memory region: 00000000000d0000 - 00000000000d6000
swsusp: Registered nosave memory region: 00000000000d6000 - 00000000000f0000
swsusp: Registered nosave memory region: 00000000000f0000 - 0000000000100000
Built 1 zonelists in Zone order.
Total pages: 56881
Kernel command line: ro root=LABEL=/ rhgb quiet
Local APIC disabled by BIOS -- you can enable it with "lapic"
mapped APIC to ffffb000 (011cc000)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
CPU 0 irqstacks, hard=c07a8000 soft=c0788000
PID hash table entries: 1024 (order: 10, 4096 bytes)
Detected 1393.258 MHz processor.
Console: colour VGA+ 80x25
console [tty0] enabled
Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
Memory: 219376k/229312k available (2183k kernel code, 9384k reserved, 1117k data, 280k init, 0k highmem)
virtual kernel memory layout:

fixmap
: 0xffc53000 - 0xfffff000
(3760 kB)

pkmap
: 0xff800000 - 0xffc00000
(4096 kB)

vmalloc : 0xce800000 - 0xff7fe000
( 783 MB)

lowmem
: 0xc0000000 - 0xcdff0000
( 223 MB)

.init : 0xc073f000 - 0xc0785000
( 280 kB)

.data : 0xc0621f7d - 0xc0739544
(1117 kB)

.text : 0xc0400000 - 0xc0621f7d
(2183 kB)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
SLUB: Genslabs=22, HWalign=32, Order=0-1, MinObjects=4, CPUs=1, Nodes=1
Calibrating delay using timer specific routine.. 2788.79 BogoMIPS (lpj=1394396)
Security Framework v1.0.0 initialized
SELinux:
Initializing.
SELinux:
Starting in permissive mode
selinux_register_security:
Registering secondary module capability
Capability LSM initialized as secondary
Mount-cache hash table entries: 512　　　　　　

Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
Compat vDSO mapped to ffffe000.
Checking 'hlt' instruction... OK.
SMP alternatives: switching to UP code
Freeing SMP alternatives: 14k freed
ACPI: Core revision 20070126
ACPI: setting ELCR to 0200 (from 0c00)
CPU0: AMD mobile AMD Athlon(tm) XP-M (LV) 1800+ stepping 00
SMP motherboard not detected.
Local APIC not detected. Using dummy APIC emulation.
Brought up 1 CPUs
sizeof(vma)=84 bytes
sizeof(page)=32 bytes
sizeof(inode)=336 bytes
sizeof(dentry)=132 bytes
sizeof(ext3inode)=488 bytes
sizeof(buffer_head)=56 bytes
sizeof(skbuff)=180 bytes
sizeof(task_struct)=1552 bytes
Booting paravirtualized kernel on bare hardware
Time:  0:43:30  Date: 12/23/07
NET: Registered protocol family 16
No dock devices found.
ACPI: bus type pci registered
PCI: PCI BIOS revision 2.10 entry at 0xfdb51, last bus=1
PCI: Using configuration type 1
Setting up standard PCI resources
ACPI: EC: Look up EC in DSDT
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using PIC for interrupt routing
ACPI: EC: GPE = 0x4, I/O: command/status = 0x66, data = 0x62
ACPI: PCI Root Bridge [PCI0] (0000:00)
Force enabled HPET at base address 0xfed00000
PCI quirk: region 0800-087f claimed by vt8235 PM
PCI quirk: region 0400-040f claimed by vt8235 SMB
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 4 *11 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 5 9 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKC] (IRQs *10 12)
ACPI: PCI Interrupt Link [LNKD] (IRQs 6 7) *0, disabled.
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 9 devices
ACPI: ACPI bus type pnp unregistered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
NetLabel: Initializing
NetLabel:  domain hash size = 128
NetLabel:  protocols = UNLABELED CIPSOv4
NetLabel:  unlabeled traffic allowed by default
hpet clockevent registered
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 32-bit timers, 14318180 Hz
Time: tsc clocksource has been installed.
pnp: 00:08: iomem range 0x0-0x9ffff could not be reserved
pnp: 00:08: iomem range 0xd0000-0xd5fff could not be reserved
pnp: 00:08: iomem range 0xf0000-0xfffff could not be reserved
pnp: 00:08: iomem range 0x100000-0xfffffff could not be reserved
PCI: Bridge: 0000:00:01.0
  IO window: disabled.
  MEM window: dde00000-dfefffff
  PREFETCH window: d5d00000-ddcfffff
PCI: Bus 2, cardbus bridge: 0000:00:0a.0
  IO window: 00001000-000010ff
  IO window: 00001400-000014ff
  PREFETCH window: 10000000-13ffffff
  MEM window: 14000000-17ffffff
PCI: Setting latency timer of device 0000:00:01.0 to 64
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10
PCI: setting IRQ 10 as level-triggered
ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10
NET: Registered protocol family 2
IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
TCP established hash table entries: 8192 (order: 4, 98304 bytes)
TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
TCP: Hash tables configured (established 8192 bind 8192)
TCP reno registered
checking if image is initramfs... it is
Freeing initrd memory: 2904k freed　　　　　　

ACPI: Sleep Button (CM) [SLPB]
input: Lid Switch as /class/input/input6
ACPI: Lid Switch [LIDD]
via-rhine.c:v1.10-LK1.4.3 2007-03-06 Written by Donald Becker
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
PCI: setting IRQ 11 as level-triggered
ACPI: PCI Interrupt 0000:00:12.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
eth0: VIA Rhine II at 0xdffffe00, 00:40:45:26:05:5b, IRQ 11.
eth0: MII PHY found at address 1, status 0x786d advertising 05e1 Link 45e1.
NET: Registered protocol family 23
input: Video Bus as /class/input/input7
ACPI: Video Device [VGA] (multi-head: yes  rom: no  post: no)
ACPI: AC Adapter [AC] (on-line)
ACPI: Battery Slot [BAT0] (battery absent)
ACPI: PCI Interrupt 0000:00:11.5[C] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10
PCI: Setting latency timer of device 0000:00:11.5 to 64
ACPI: PCI Interrupt 0000:00:11.6[C] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10
PCI: Setting latency timer of device 0000:00:11.6 to 64
SELinux: initialized (dev ramfs, type ramfs), uses genfs_contexts
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
usb-storage: device scan complete
scsi 2:0:0:0: Direct-Access     Maxtor 6 Y080L0           YAR4 PQ: 0 ANSI: 0 CCS
sd 2:0:0:0: [sdb] 160086528 512-byte hardware sectors (81964 MB)
sd 2:0:0:0: [sdb] Write Protect is off
sd 2:0:0:0: [sdb] Mode Sense: 00 14 00 00
sd 2:0:0:0: [sdb] Assuming drive cache: write through
sd 2:0:0:0: [sdb] 160086528 512-byte hardware sectors (81964 MB)
sd 2:0:0:0: [sdb] Write Protect is off
sd 2:0:0:0: [sdb] Mode Sense: 00 14 00 00
sd 2:0:0:0: [sdb] Assuming drive cache: write through
sdb: sdb1 sdb2 < sdb5 sdb6 sdb7 sdb8 >
sd 2:0:0:0: [sdb] Attached SCSI disk
sd 2:0:0:0: Attached scsi generic sg2 type 0
ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 9
PCI: setting IRQ 9 as level-triggered
ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNKB] -> GSI 9 (level, low) -> IRQ 9
device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com
device-mapper: multipath: version 1.0.5 loaded
loop: module loaded
EXT3 FS on sda1, internal journal
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
Adding 522104k swap on /dev/sda2.  Priority:-1 extents:1 across:522104k
SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
ip6_tables: (C) 2000-2006 Netfilter Core Team
Clocksource tsc unstable (delta = -101498769 ns)
Netfilter messages via NETLINK v0.30.
nf_conntrack version 0.5.0 (4096 buckets, 16384 max)
ip_tables: (C) 2000-2006 Netfilter Core Team
eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
audit(1198341842.793:4): audit_pid=1692 old=0 by auid=4294967295 subj=system_u:system_r:auditd_t:s0
SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts
Bluetooth: Core ver 2.11
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP ver 2.8
Bluetooth: L2CAP socket layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM ver 1.8
SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
eth0: no IPv6 routers present
Bridge firewalling registered
virbr0: Dropping NETIF_F_UFO since no NETIF_F_HW_CSUM feature.
[drm] Initialized drm 1.1.0 20060810
[drm] Initialized via 2.11.1 20070202 on minor 0
agpgart: Found an AGP 3.5 compliant device at 0000:00:00.0.
agpgart: BIOS bug. AGP bridge claims to only support x4 rateFixing up support for x2 & x1
agpgart: Device is in legacy mode, falling back to 2.x
agpgart: Putting AGP V2 device at 0000:00:00.0 into 4x mode
agpgart: Putting AGP V2 device at 0000:01:00.0 into 4x mode
irq 11: nobody cared (try booting with the "irqpoll" option)
[<c045b0c6>] __report_bad_irq+0x36/0x75
[<c045b2dc>] note_interrupt+0x1d7/0x213
[<c045a787>] handle_IRQ_event+0x23/0x51
[<c045bc0b>] handle_level_irq+0x88/0xb9
[<c045bb83>] handle_level_irq+0x0/0xb9
[<c04074c3>] do_IRQ+0x8c/0xb9
[<c0405b6f>] common_interrupt+0x23/0x28
[<c0431de2>] __do_softirq+0x56/0xd3
[<c04073d5>] do_softirq+0x6c/0xce
[<c04639a1>] generic_file_buffered_write+0x4e0/0x5e7
[<c045bb83>] handle_level_irq+0x0/0xb9
[<c0431cb5>] irq_exit+0x38/0x6b
[<c04074d6>] do_IRQ+0x9f/0xb9
[<c0405b6f>] common_interrupt+0x23/0x28
[<c04664bd>] get_page_from_freelist+0x249/0x2db
[<c04665b3>] __alloc_pages+0x64/0x2a2
[<c0474089>] anon_vma_prepare+0x20/0xb5
[<c041af20>] flush_tlb_page+0x3e/0x65
[<c046cd65>] do_wp_page+0x25e/0x507
[<ce899f88>] ext3_file_write+0x24/0x90 [ext3]
[<c046eff6>] handle_mm_fault+0x704/0x78b
[<c0431cd0>] irq_exit+0x53/0x6b
[<c04074d6>] do_IRQ+0x9f/0xb9
[<c0405b6f>] common_interrupt+0x23/0x28
[<c0620284>] do_page_fault+0x26a/0x5ef
[<c061d49c>] __sched_text_start+0x594/0x638
[<c04592e6>] audit_syscall_exit+0x2aa/0x2c6
[<c062001a>] do_page_fault+0x0/0x5ef
[<c061ed02>] error_code+0x72/0x78
=======================
handlers:
[<ce94898c>] (rhine_interrupt+0x0/0x6b3 [via_rhine])
Disabling IRQ #11
virbr0: no IPv6 routers present
agpgart: Found an AGP 3.5 compliant device at 0000:00:00.0.
agpgart: BIOS bug. AGP bridge claims to only support x4 rateFixing up support for x2 & x1
agpgart: Device is in legacy mode, falling back to 2.x
agpgart: Putting AGP V2 device at 0000:00:00.0 into 4x mode
agpgart: Putting AGP V2 device at 0000:01:00.0 into 4x mode
SELinux: initialized (dev sdb6, type vfat), uses genfs_contexts
SELinux: initialized (dev sda4, type vfat), uses genfs_contexts
SELinux: initialized (dev sdb5, type vfat), uses genfs_contexts
SELinux: initialized (dev sda5, type vfat), uses genfs_contexts
SELinux: initialized (dev sda7, type vfat), uses genfs_contexts
SELinux: initialized (dev sdb7, type vfat), uses genfs_contexts
SELinux: initialized (dev sdb8, type vfat), uses genfs_contexts
SELinux: initialized (dev sdb1, type vfat), uses genfs_contexts
SELinux: initialized (dev sda6, type vfat), uses genfs_contexts
NETDEV WATCHDOG: eth0: transmit timed out
eth0: Transmit timed out, status 1003, PHY status 786d, resetting...
via-rhine: Reset not complete yet. Trying harder.
eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
NETDEV WATCHDOG: eth0: transmit timed out
eth0: Transmit timed out, status 1003, PHY status 786d, resetting...
eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
NETDEV WATCHDOG: eth0: transmit timed out
eth0: Transmit timed out, status 1003, PHY status 786d, resetting...
eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
NETDEV WATCHDOG: eth0: transmit timed out
eth0: Transmit timed out, status 1003, PHY status 786d, resetting...
eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[root@Infinite ~]#　　　　　　

[root@Infinite ~]# ifconfig -a
eth0      Link encap:Ethernet  HWaddr 00:40:45:26:05:5B  
          inet addr:192.168.16.23  Bcast:192.168.16.255  Mask:255.255.255.0
          inet6 addr: fe80::240:45ff:fe26:55b/64 Scopeink
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:390 errors:0 dropped:5237 overruns:0 frame:0
          TX packets:34 errors:4 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:23546 (22.9 KiB)  TX bytes:5263 (5.1 KiB)
          Interrupt:11 Base address:0x8e00

lo        Link encapocal Loopback  
          inet addr:127.0.0.1  Mask:255.0.0.0
          inet6 addr: ::1/128 Scope:Host
          UP LOOPBACK RUNNING  MTU:16436  Metric:1
          RX packets:3037 errors:0 dropped:0 overruns:0 frame:0
          TX packets:3037 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:3313676 (3.1 MiB)  TX bytes:3313676 (3.1 MiB)

virbr0    Link encap:Ethernet  HWaddr 00:00:00:00:00:00  
          inet addr:192.168.122.1  Bcast:192.168.122.255  Mask:255.255.255.0
          inet6 addr: fe80::200:ff:fe00:0/64 Scopeink
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:34 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:0 (0.0 b)  TX bytes:5360 (5.2 KiB)
[root@Infinite ~]# lspci
00:00.0 Host bridge: VIA Technologies, Inc. VT8378 [KM400/A] Chipset Host Bridge
00:01.0 PCI bridge: VIA Technologies, Inc. VT8237 PCI Bridge
00:0a.0 CardBus bridge: O2 Micro, Inc. OZ601/6912/711E0 CardBus/SmartCardBus Controller (rev 20)
00:10.0 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 80)
00:10.1 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 80)
00:10.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 80)
00:10.3 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 82)
00:11.0 ISA bridge: VIA Technologies, Inc. VT8235 ISA Bridge
00:11.1 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06)
00:11.5 Multimedia audio controller: VIA Technologies, Inc. VT8233/A/8235/8237 AC97 Audio Controller (rev 50)
00:11.6 Communication controller: VIA Technologies, Inc. AC'97 Modem Controller (rev 80)
00:12.0 Ethernet controller: VIA Technologies, Inc. VT6102 [Rhine-II] (rev 74)
01:00.0 VGA compatible controller: VIA Technologies, Inc. VT8378 [S3 UniChrome] Integrated Video (rev 01)
[root@Infinite ~]# netstat -rn
Kernel IP routing table
Destination     Gateway         Genmask         Flags   MSS Window  irtt Iface
192.168.16.0    0.0.0.0         255.255.255.0   U         0 0          0 eth0
192.168.122.0   0.0.0.0         255.255.255.0   U         0 0          0 virbr0
169.254.0.0     0.0.0.0         255.255.0.0     U         0 0          0 eth0
0.0.0.0         192.168.16.1    0.0.0.0         UG        0 0          0 eth0
[root@Infinite ~]#



[root@Infinite ~]# /etc/init.d/network restart
Shutting down interface eth0:                              [  OK  ]
Shutting down loopback interface:                          [  OK  ]
Bringing up loopback interface:                            [  OK  ]
Bringing up interface eth0:  /etc/sysconfig/network-scripts/ifup-eth: line 297:  4009 Segmentation fault      ip link set dev ${REALDEVICE} up
Failed to bring up eth0.
                                                           [FAILED]

Message from syslogd@Infinite at Dec 23 00:53:59 ...
kernel: Oops: 0000 [#1] SMP

Message from syslogd@Infinite at Dec 23 00:53:59 ...
kernel: EIP:    0060:[<ce948b1e>]    Not tainted VLI

Message from syslogd@Infinite at Dec 23 00:53:59 ...
kernel: eax: 00000000   ebx: c9960500   ecx: ce838e0e   edx: c9960000

Message from syslogd@Infinite at Dec 23 00:53:59 ...
kernel: EIP is at rhine_interrupt+0x192/0x6b3 [via_rhine]

Message from syslogd@Infinite at Dec 23 00:53:59 ...
kernel: CPU:    0

Message from syslogd@Infinite at Dec 23 00:53:59 ...
kernel: EFLAGS: 00210093   (2.6.23.1-42.fc8 #1)

Message from syslogd@Infinite at Dec 23 00:53:59 ...
kernel: ds: 007b   es: 007b   fs: 00d8  gs: 0033  ss: 0068

Message from syslogd@Infinite at Dec 23 00:53:59 ...
kernel: Stack: c04645e8 00000000 00000004 00000000 0000007a c9960000 ce838e00 00000003

Message from syslogd@Infinite at Dec 23 00:53:59 ...
kernel: esi: ce838e00   edi: 00000000   ebp: 00000000   esp: c7bece34

Message from syslogd@Infinite at Dec 23 00:53:59 ...
kernel:        00000080 0162bf80 c9960000 c9960000 00001002 c9960500 ce949e8d c9960000

Message from syslogd@Infinite at Dec 23 00:53:59 ...
kernel:  [<c04645e8>] filemap_fault+0x224/0x383

Message from syslogd@Infinite at Dec 23 00:53:59 ...
kernel:        00000014 00000000 c7bece94 00200202 c462b5c0 0000000b ce94898c c045b03c

Message from syslogd@Infinite at Dec 23 00:53:59 ...
kernel:  [<ce94898c>] rhine_interrupt+0x0/0x6b3 [via_rhine]

Message from syslogd@Infinite at Dec 23 00:53:59 ...
kernel:  [<c045b03c>] request_irq+0xb2/0xe6

Message from syslogd@Infinite at Dec 23 00:53:59 ...
kernel: Process ip (pid: 4009, ti=c7bec000 task=c2064c20 task.ti=c7bec000)

Message from syslogd@Infinite at Dec 23 00:53:59 ...
kernel: Call Trace:

Message from syslogd@Infinite at Dec 23 00:53:59 ...
kernel:  [<ce949e8d>] rhine_open+0x3b/0x1c3 [via_rhine]

Message from syslogd@Infinite at Dec 23 00:53:59 ...
kernel:  [<c05bd2d7>] dev_open+0x2e/0x68

Message from syslogd@Infinite at Dec 23 00:53:59 ...
kernel:  [<c05bb5b6>] dev_change_flags+0x9c/0x14d

Message from syslogd@Infinite at Dec 23 00:53:59 ...
kernel:  [<c05fabec>] devinet_ioctl+0x224/0x52f

Message from syslogd@Infinite at Dec 23 00:53:59 ...
kernel:  [<c05b1afb>] sock_ioctl+0x19f/0x1be

Message from syslogd@Infinite at Dec 23 00:53:59 ...
kernel:  [<c048b6a8>] sys_ioctl+0x4c/0x64

Message from syslogd@Infinite at Dec 23 00:53:59 ...
kernel:  =======================

Message from syslogd@Infinite at Dec 23 00:53:59 ...
kernel: Code: 00 8b ab 54 03 00 00 8d 83 3c 03 00 00 83 e5 0f e8 7e 5e cd f1 e9 99 01 00 00 8b 43 04 89 ef c1 e7 04 01 f8 83 3d e0 c8 94 ce 06 <8b> 30 7e 14 89 74 24 08 89 6c 24 04 c7 04 24 7d ab 94 ce e8 b5

Message from syslogd@Infinite at Dec 23 00:53:59 ...
kernel:  [<c04f6b48>] copy_to_user+0x34/0x48

Message from syslogd@Infinite at Dec 23 00:53:59 ...
kernel:  [<c05b195c>] sock_ioctl+0x0/0x1be

Message from syslogd@Infinite at Dec 23 00:53:59 ...
kernel:  [<c048b3cf>] do_ioctl+0x1f/0x63

Message from syslogd@Infinite at Dec 23 00:53:59 ...
kernel:  [<c048b64a>] vfs_ioctl+0x237/0x249

Message from syslogd@Infinite at Dec 23 00:53:59 ...
kernel: EIP: [<ce948b1e>] rhine_interrupt+0x192/0x6b3 [via_rhine] SS:ESP 0068:c7bece34

Message from syslogd@Infinite at Dec 23 00:53:59 ...
kernel:  [<c040518a>] syscall_call+0x7/0xb　　　　　　

input: Lid Switch as /class/input/input6
ACPI: Lid Switch [LIDD]
via-rhine.c:v1.10-LK1.4.3 2007-03-06 Written by Donald Becker
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
PCI: setting IRQ 11 as level-triggered
ACPI: PCI Interrupt 0000:00:12.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
eth0: VIA Rhine II at 0xdffffe00, 00:40:45:26:05:5b, IRQ 11.
eth0: MII PHY found at address 1, status 0x786d advertising 05e1 Link 45e1.
NET: Registered protocol family 23
input: Video Bus as /class/input/input7
ACPI: Video Device [VGA] (multi-head: yes  rom: no  post: no)
ACPI: AC Adapter [AC] (on-line)
ACPI: Battery Slot [BAT0] (battery absent)
ACPI: PCI Interrupt 0000:00:11.5[C] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10
PCI: Setting latency timer of device 0000:00:11.5 to 64
ACPI: PCI Interrupt 0000:00:11.6[C] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10
PCI: Setting latency timer of device 0000:00:11.6 to 64
SELinux: initialized (dev ramfs, type ramfs), uses genfs_contexts
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
usb-storage: device scan complete
ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 9
PCI: setting IRQ 9 as level-triggered
ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNKB] -> GSI 9 (level, low) -> IRQ 9
device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com
device-mapper: multipath: version 1.0.5 loaded
loop: module loaded
EXT3 FS on sda1, internal journal
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
Adding 522104k swap on /dev/sda2.  Priority:-1 extents:1 across:522104k
SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
ip6_tables: (C) 2000-2006 Netfilter Core Team
Clocksource tsc unstable (delta = -101498769 ns)
Netfilter messages via NETLINK v0.30.
nf_conntrack version 0.5.0 (4096 buckets, 16384 max)
ip_tables: (C) 2000-2006 Netfilter Core Team
eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
audit(1198341842.793:4): audit_pid=1692 old=0 by auid=4294967295 subj=system_u:system_r:auditd_t:s0
SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts
Bluetooth: Core ver 2.11
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP ver 2.8
Bluetooth: L2CAP socket layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM ver 1.8
SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
eth0: no IPv6 routers present
Bridge firewalling registered
virbr0: Dropping NETIF_F_UFO since no NETIF_F_HW_CSUM feature.
[drm] Initialized drm 1.1.0 20060810
[drm] Initialized via 2.11.1 20070202 on minor 0
agpgart: Found an AGP 3.5 compliant device at 0000:00:00.0.
agpgart: BIOS bug. AGP bridge claims to only support x4 rateFixing up support for x2 & x1
agpgart: Device is in legacy mode, falling back to 2.x
agpgart: Putting AGP V2 device at 0000:00:00.0 into 4x mode
agpgart: Putting AGP V2 device at 0000:01:00.0 into 4x mode
irq 11: nobody cared (try booting with the "irqpoll" option)
[<c045b0c6>] __report_bad_irq+0x36/0x75
[<c045b2dc>] note_interrupt+0x1d7/0x213
[<c045a787>] handle_IRQ_event+0x23/0x51
[<c045bc0b>] handle_level_irq+0x88/0xb9
[<c045bb83>] handle_level_irq+0x0/0xb9
[<c04074c3>] do_IRQ+0x8c/0xb9
[<c0405b6f>] common_interrupt+0x23/0x28
[<c0431de2>] __do_softirq+0x56/0xd3
[<c04073d5>] do_softirq+0x6c/0xce
[<c04639a1>] generic_file_buffered_write+0x4e0/0x5e7
[<c045bb83>] handle_level_irq+0x0/0xb9
[<c0431cb5>] irq_exit+0x38/0x6b
[<c04074d6>] do_IRQ+0x9f/0xb9
[<c0405b6f>] common_interrupt+0x23/0x28
[<c04664bd>] get_page_from_freelist+0x249/0x2db
[<c04665b3>] __alloc_pages+0x64/0x2a2
[<c0474089>] anon_vma_prepare+0x20/0xb5
[<c041af20>] flush_tlb_page+0x3e/0x65
[<c046cd65>] do_wp_page+0x25e/0x507
[<ce899f88>] ext3_file_write+0x24/0x90 [ext3]
[<c046eff6>] handle_mm_fault+0x704/0x78b
[<c0431cd0>] irq_exit+0x53/0x6b
[<c04074d6>] do_IRQ+0x9f/0xb9
[<c0405b6f>] common_interrupt+0x23/0x28
[<c0620284>] do_page_fault+0x26a/0x5ef
[<c061d49c>] __sched_text_start+0x594/0x638
[<c04592e6>] audit_syscall_exit+0x2aa/0x2c6
[<c062001a>] do_page_fault+0x0/0x5ef
[<c061ed02>] error_code+0x72/0x78
=======================
handlers:
[<ce94898c>] (rhine_interrupt+0x0/0x6b3 [via_rhine])
Disabling IRQ #11
virbr0: no IPv6 routers present
agpgart: Found an AGP 3.5 compliant device at 0000:00:00.0.
agpgart: BIOS bug. AGP bridge claims to only support x4 rateFixing up support for x2 & x1
agpgart: Device is in legacy mode, falling back to 2.x
agpgart: Putting AGP V2 device at 0000:00:00.0 into 4x mode
agpgart: Putting AGP V2 device at 0000:01:00.0 into 4x mode
SELinux: initialized (dev sdb6, type vfat), uses genfs_contexts
SELinux: initialized (dev sda4, type vfat), uses genfs_contexts
SELinux: initialized (dev sdb5, type vfat), uses genfs_contexts
SELinux: initialized (dev sda5, type vfat), uses genfs_contexts
SELinux: initialized (dev sda7, type vfat), uses genfs_contexts
SELinux: initialized (dev sdb7, type vfat), uses genfs_contexts
SELinux: initialized (dev sdb8, type vfat), uses genfs_contexts
SELinux: initialized (dev sdb1, type vfat), uses genfs_contexts
SELinux: initialized (dev sda6, type vfat), uses genfs_contexts
NETDEV WATCHDOG: eth0: transmit timed out
eth0: Transmit timed out, status 1003, PHY status 786d, resetting...
via-rhine: Reset not complete yet. Trying harder.
eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
NETDEV WATCHDOG: eth0: transmit timed out
eth0: Transmit timed out, status 1003, PHY status 786d, resetting...
eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
NETDEV WATCHDOG: eth0: transmit timed out
eth0: Transmit timed out, status 1003, PHY status 786d, resetting...
eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
NETDEV WATCHDOG: eth0: transmit timed out
eth0: Transmit timed out, status 1003, PHY status 786d, resetting...
eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[root@Infinite ~]#

[root@Infinite ~]# lsmod
Module                  Size  Used by
vfat                   13249  9
fat                    45277  1 vfat
via                    39105  2
drm                    67028  3 via
ipt_MASQUERADE          6721  1
iptable_nat             9669  1
nf_nat                 18669  2 ipt_MASQUERADE,iptable_nat
bridge                 46809  0
sunrpc                140765  1
nf_conntrack_ipv4      11717  8 iptable_nat
ipt_REJECT              7617  4
iptable_filter          6465  1
ip_tables              14213  2 iptable_nat,iptable_filter
nf_conntrack_ftp       10977  0
nf_conntrack_ipv6      18769  5
xt_state                6081  11
nfnetlink               8281  4 nf_nat,nf_conntrack_ipv4,nf_conntrack_ipv6,nf_conntrack
xt_tcpudp               6977  18
ip6t_ipv6header         6209  2
ip6t_REJECT             8257  2
ip6table_filter         6337  1
ip6_tables             15109  2 ip6t_ipv6header,ip6table_filter
x_tables               14277  9 ipt_MASQUERADE,iptable_nat,ipt_REJECT,ip_tables,xt_state,xt_tcpudp,ip6t_ipv6header,ip6t_REJECT,ip6_tables
loop                   16581  0
dm_mirror              21697  0
dm_multipath           18249  0
dm_mod                 46465  2 dm_mirror,dm_multipath
ipv6                  245989  14 nf_conntrack_ipv6,ip6t_REJECT
snd_via82xx_modem      14409  0
snd_seq_dummy           6725  0
snd_seq_oss            29889  0
snd_seq_midi_event      9793  1 snd_seq_oss
snd_seq                44849  5 snd_seq_dummy,snd_seq_oss,snd_seq_midi_event
snd_via82xx            25177  3
gameport               14665  1 snd_via82xx
snd_ac97_codec         92389  2 snd_via82xx_modem,snd_via82xx
i2c_viapro             11093  0
snd_pcm_oss            37569  0
i2c_core               21825  1 i2c_viapro
snd_mixer_oss          16705  1 snd_pcm_oss
ac97_bus                6081  1 snd_ac97_codec
battery                14025  0
ac                      8133  0
video                  19921  0
snd_mpu401_uart        10177  1 snd_via82xx
output                  6977  1 video
via_ircc               21077  0
snd_pcm                63685  4 snd_via82xx_modem,snd_via82xx,snd_ac97_codec,snd_pcm_oss
irda                  106617  1 via_ircc
via_rhine              23753  0
snd_rawmidi            21185  1 snd_mpu401_uart
button                 10321  0
mii                     8385  1 via_rhine
snd_timer              20549  2 snd_seq,snd_pcm
snd_seq_device         10061  4 snd_seq_dummy,snd_seq_oss,snd_seq,snd_rawmidi
usb_storage            73345  5
serio_raw               9029  0
crc_ccitt               6081  1 irda
snd                    43461  18 snd_via82xx_modem,snd_seq_oss,snd_seq,snd_via82xx,snd_ac97_codec,snd_pcm_oss,snd_mixer_oss,snd_mpu401_uart,snd_pcm,snd_rawmidi,snd_timer,snd_seq_device
snd_page_alloc         11337  3 snd_via82xx_modem,snd_via82xx,snd_pcm
soundcore               9633  1 snd
joydev                 11649  0
sg                     31965  0
sr_mod                 17509  0
cdrom                  33889  1 sr_mod
ata_generic             8901  0
pata_via               12229  6
libata                 99633  2 ata_generic,pata_via
sd_mod                 27329  13
scsi_mod              119757  5 usb_storage,sg,sr_mod,libata,sd_mod
ext3                  110665  1
jbd                    52457  1 ext3
mbcache                10177  1 ext3
uhci_hcd               23633  0
ohci_hcd               21445  0
ehci_hcd               31693  0　　　　　　

网关地址是什么，通否？　　　　　　

好象网卡中断有问题　　　　　　

网关地址不通啊.只能PING通自己的IP地址和环回地址.可是我在命令行(不启动X)时网络是通的.启动X后就不行了.七楼说的是对的.我的网卡IRQ是11,但是信息中有个Disabling IRQ #11的提示,所以极有可能是这方面的问题...

请问怎么修改IRQ呢???
多谢先啊.　　　　　　

先确认你卡是否有问题，如果是独立的，重新插下，或者换个插槽
如果是集成的，在bios里设置

其实我觉得是不是你的主板快坏了