11 12
发新话题
打印

Redhat7.3安装后,不能进入x-windows?

Redhat7.3安装后,不能进入x-windows?

:confused: 我安装的REDHAT7.3,在startx后没有进入X-WINDOWS,而是出现了一大堆的消息,其中有no screens found. 不知道怎么样才能进入图形界面!请问我的机子是不是不能安装Redhat7.3了?!因为对LINUX不是很熟悉,请详细点...
谢谢!!!      
lnny

TOP

哥们
7.3怎么安的
我怎么按不上呀
谢谢,请多多指教
我是在win98下光盘启动下安装的可是到了第二张盘时就显示有错误
我怀疑是设置分区时的事我的内存是256可是分得是127
别都没感觉错
帮帮忙了      

TOP

是你的显卡驱动程序没有装好吧,
在安装过程中提示你选择显卡的类型,你选对了吗?
不要着急,你可以把你的显卡程序安装好就可以进去X了      
kl(凯良):

TOP

请检查显示卡和显示器设置

要想使用X-WINDOWS,必须正确设置显示卡和显示器,REDHAT 7.3能够自动识别绝大部分的显示卡和显示器,请根据你的实际情况设置.      

TOP

硬件是流行的?

您的硬件是最新买的吗?显示卡是高端的?好好配置一下Xconfiguration,然后startx就应该OK了      

TOP

zhangsongyan788

你那出错误是什么信息?贴上来看看      

TOP

我很菜问一下什么是x-windows呀!

我很菜问一下什么是x-windows呀!      

TOP

我很菜问一下什么是x-windows呀!

我很菜问一下什么是x-windows呀!能看网页是不是亚!      

TOP

xwindows
就是windows了.不果名子不一样.

你在xp下的事情在这里都可以作的.

不能startx都是显卡没有配置好.       

TOP

具体如下:

If the server is older than 6-12 mounth ,or if your card is newer than the above date,look for a newer version before reporting problem.
Build Operating systeminux2.4.17-0.13smp i686 [ELF]
Build Host:daffy.perf.redhat.com
Moudule Loander present.
Morker--)probed,(**)from config file,(==)default setting,(++)from command line
      (!!)notice,(II)information,(ww)warning,(EE)error,(NI) no impletion.
       (??)Unknow.
(==)bog file:"/var/log/XFree86.0.log",Time......
(==)Using config file:"/etc/x11/XF86Config-4"
(EE) No desices detected.

Fatal server error.
no screens found

When reporting a problem rebated to a server crash,please send the fall server output.not just the last messages,This can be found in the log file "/var/log/XFree86.0.log"
Please report the problem to ........

XIO:fatal IO error 104 (connection reset by peer) on X server":0.0" after 0 requests (0 known precessed) with 0 events remaining      
lnny

TOP

 11 12
发新话题